Description
The Otis Ripcord for .17 caliber takes the fuss out of bore cleaning. Instead of feeding patches one at a time or wrestling with a rod, you run this flexible cord straight through from breech to muzzle in a single pull. It's built for the tight bore of a .17, so the caliber-specific core actually fills the space and does its job instead of sliding through untouched.
How the .17 Cal Ripcord Gets the Bore Clean
The heart of this thing is a rigid, helix-shaped rubber core that keeps the cleaning surface pressed firmly against the rifling as it travels down the barrel. Wrapped around that core is braided Nomex, the same fiber family used in firefighting gear, which does double duty as a brush to loosen carbon and copper fouling and a patch to trap and carry it out. You get a full 360 degrees of contact and roughly 10 inches of aggressive cleaning surface working the bore on every pass.
Range-Ready and Built for the Field
One of the best parts about the Ripcord is that the Nomex surface handles heat up to 700 degrees, so you don't have to wait for a hot barrel to cool down before running it. That makes it a natural fit for between-string cleaning at the bench or a quick pass out in the field where lugging a full kit isn't practical. It rolls up small, tucks into a range bag or pocket, and there's no rod to bend or lose.
Add-On Compatibility with the Ripcord .17
Both ends of the cord are finished with 5-40 threads, so you can attach a bore brush or other Otis breech-cleaning components when you want an even deeper scrub. Keep in mind this is the 36-inch .17 caliber version, sized for rimfire and small-bore rifles, and a longer barrel with a muzzle device may need a little planning to get a solid grip on the pull-through end. For everyday maintenance on a .17, it's a fast, effective, no-mess way to keep that skinny bore in top shape.
Key Specifications
- Manufacturer: Otis Technology
- Manufacturer Part Number: FGRC317
- UPC: 014895004524
- Caliber: .17
- Length: 36"
- Thread Pattern: 5-40
- Cleaning Surface: Braided Nomex, roughly 10"
- Core: Helix-shaped rubberized, caliber specific
- Cleaning Coverage: 360 degrees
- Heat Resistance: Up to 700 degrees F
- Country of Origin: United States
What’s Included
- Otis Ripcord .17 caliber bore cleaner, 36" with T-handle
Frequently Asked Questions
How does the Otis Ripcord .17 cal actually clean the bore?
You feed one threaded end into the breech and pull the whole cord through to the muzzle in a single pass. The helix-shaped rubber core presses the braided Nomex against the rifling for full 360-degree contact, loosening fouling and carrying it out as it goes. For a deeper clean you can run it more than once or add a bit of solvent.
Will this Ripcord work on longer .17 caliber barrels?
The 36-inch length covers most standard .17 rimfire and small-bore rifle barrels with room to grab the end and pull through. If you're running a long barrel with a muzzle brake or suppressor, measure first, since the thicker cleaning section needs to clear the muzzle enough to get a solid grip. For typical .17 setups it pulls through with no trouble.
Can I use the .17 Ripcord on a hot barrel at the range?
Yes. The braided Nomex surface is rated to handle heat up to 700 degrees, so you can run it between strings without waiting for the barrel to cool. That's one of the reasons it's popular for quick cleanups at the bench or out in the field.
Can I attach a bore brush to the Otis Ripcord?
Both ends are finished with 5-40 threads that accept Otis breech-cleaning components, including bore brushes. Threading on a brush lets you tackle heavier carbon or copper buildup when a standard pass isn't quite enough. It's a handy way to expand what the cord can do.





Reviews
There are no reviews yet.