Description
The factory Gen5 Glock trigger gets the job done, but plenty of owners want something with less mush and a cleaner break. The Apex Action Enhancement Kit is one of the most trusted ways to get there. It replaces your factory polymer trigger and connector with a matched set of Apex parts that smooth out the whole pull without touching the safeties or requiring any permanent work on the frame.
What Comes in the Apex Action Enhancement Kit
The kit includes the Apex Action Enhancement trigger already mounted on a dedicated Gen5 Apex trigger bar, plus an Apex Performance Connector. That Gen5 bar is purpose-built for the ambidextrous slide lock lever on Gen5 frames, so it is not a warmed-over Gen4 part. Together the trigger, bar, and connector shave roughly a pound off the factory pull and land you in the mid five-pound range, with reduced pre-travel, a shorter reset, and a break that feels noticeably crisper.
How the Apex Gen5 Trigger Kit Fits Your Glock
This red trigger kit is set up for Gen5 models: the G17, G19, G19X, G26, G34, and G45. It will not function in Gen3 or Gen4 Glocks because of the different trigger bar and slide lock design, so it is worth double-checking your generation before ordering. Installation is a straight parts swap that many folks handle at home with a 3/32 punch, though Apex recommends a competent gunsmith do the work. Whichever route you take, run through all three Glock safety checks afterward and grease the contact point between the trigger bar and connector, since that is the most important lubrication point in the fire control system.
Real-world feedback on this kit is consistent: the parts show up highly polished, the pull tightens up right out of the box, and the improvement gets even better after a few hundred rounds settle everything in. If you are leaving the stock trigger behind on your Gen5, this is the kit to reach for.
Key Specifications
- Manufacturer: Apex Tactical Specialties Inc.
- Model: Action Enhancement
- Manufacturer Part Number: 102156
- UPC: 854263007630
- Color / Finish: Red
- Fitment: Glock G17, G19, G19X, G26, G34, G45 Gen5
- Installation: Direct drop-in, no permanent modification
- Pull Weight Reduction: Approximately 1 lb
- Construction: Polymer and steel
- Length: 5.3 in
- Compatibility Note: Does not fit Gen3 or Gen4 Glocks
What’s Included
- Apex Action Enhancement Trigger mounted on Gen5 Apex Trigger Bar
- Apex Performance Connector
Frequently Asked Questions
Which Glocks does the Apex Action Enhancement Kit fit?
This kit is built for Gen5 pistols, including the G17, G19, G19X, G26, G34, and G45. Because of the Gen5 ambidextrous slide lock lever and trigger bar design, it will not work in Gen3 or Gen4 models. Check your generation before ordering so you get the right kit.
How much does this kit lighten the trigger pull?
The Action Enhancement Kit reduces pull weight by roughly a pound, which typically lands a Gen5 trigger in the mid five-pound range. Along with the lighter pull, you get reduced pre-travel, a shorter reset, and a crisper break. Many owners find the pull smooths out even more after a few hundred rounds.
Can I install the Apex kit myself or do I need a gunsmith?
It is a straight parts swap that plenty of owners handle at home with a 3/32 pin punch, and the parts arrive highly polished. Apex does recommend installation by a competent gunsmith, and either way you should run all three Glock safety checks afterward. Don't skip greasing the contact point between the trigger bar and connector.
Does this kit change the Glock safeties?
No. The kit is engineered to keep the factory safety values intact while refining trigger feel, and it does not require any permanent modification to your pistol. After installing, verify the trigger safety, drop safety, and striker block all function correctly before shooting.





Reviews
There are no reviews yet.