Description
There is a reason the Mountain Pro sits at the top of Browning's bolt gun lineup, and this CF version takes the weight savings a step further. Instead of a fluted steel barrel, you get a 26 inch stainless barrel wrapped in carbon fiber by Preferred Barrel Blanks. And this is true wrapped construction, not a carbon sleeve slipped over a skinny tube, so you get real stiffness and faster cooling along with the lighter carry weight. Chambered in 7mm Rem Mag, it has the legs for cross-canyon elk and open-country mule deer, and the included Recoil Hawg muzzle brake knocks the sting out of the magnum so follow-up shots come easy. Prefer to run a can? The brake spins off the 5/8×24 threads and a thread protector comes in the box.
A Carbon Fiber Stock That Earns Its Keep
The second generation carbon fiber stock is the kind of detail that separates this rifle from the pack. It is a one piece design filled with noise-dampening foam, and the action beds into a compression molded carbon fiber block that keeps the barrel free floating shot after shot. The adjustable comb lets you dial in cheek weld and eye alignment for larger scopes, with spacers that give you a full inch of height adjustment. A short Picatinny rail at the fore-end tip handles bipod duty, flush QD cups take your sling, and a thick Inflex recoil pad soaks up what the brake does not.
X-Bolt 2 Refinements Where It Counts
The Pro stainless receiver has been trimmed of excess material and gains added bolt guidance surfaces, so the spiral fluted bolt runs smooth without binding. The aluminum bolt handle shaves a bit more weight, the 60 degree bolt lift clears big scope eyepieces, and the adjustable DLX trigger lets you set the pull to your liking. A top tang safety with bolt unlock button rounds out the controls, and the detachable rotary magazine feeds three rounds straight in line with the bore. Add glass to the drilled and tapped receiver, wrapped in tough Carbon Gray Cerakote, and this rifle is ready for the high country.
Key Specifications
- Manufacturer: Browning
- Model: X-Bolt 2 Mountain Pro CF
- Manufacturer Part Number: 036083227
- UPC: 023614865810
- Caliber: 7mm Remington Magnum
- Action: Bolt Action (Long Action)
- Barrel Length: 26 in
- Barrel: Carbon fiber wrapped stainless steel, Preferred Barrel Blanks
- Muzzle: 5/8×24 threaded, Recoil Hawg muzzle brake
- Capacity: 3+1, detachable rotary magazine
- Stock: Carbon fiber with adjustable comb
- Metal Finish: Carbon Gray Cerakote
- Trigger: Adjustable DLX
- Safety: Top tang with bolt unlock button
- Sights: None, drilled and tapped for scope mounts
- Recoil Pad: Inflex
What’s Included
- Browning X-Bolt 2 Mountain Pro CF rifle
- One 3-round rotary magazine
- Recoil Hawg muzzle brake (installed)
- Thread protector
- Adjustable comb spacers
- Owner's manual
Frequently Asked Questions
Is the barrel on the X-Bolt 2 Mountain Pro CF a true carbon fiber barrel?
Yes. The stainless steel barrel is fully wrapped in carbon fiber by Preferred Barrel Blanks, not just covered with a cosmetic carbon sleeve. Each barrel starts as a precision bored, button rifled, stress relieved blank before wrapping, so you get genuine stiffness and weight savings along with the looks.
Can I run a suppressor on this rifle?
You can. The muzzle is threaded 5/8×24, which is the most common thread pitch for big bore suppressors and aftermarket brakes. Simply remove the included Recoil Hawg brake and thread on your can, or use the included thread protector when running the muzzle bare.
Does the Browning X-Bolt 2 Mountain Pro CF come with sights or a scope?
No sights or optic are included, since this rifle is designed to be run with a scope. The receiver is drilled and tapped for Browning's X-Lock mounting system, which uses four screws per base for a rock solid hold. Pair it with quality glass and the adjustable comb makes it easy to get your eye lined up behind it.
How does the adjustable comb work on this stock?
The carbon fiber stock includes spacers in 1/2, 1/4, and 1/8 inch sizes that let you raise the comb over a full inch of range. That means you can set your cheek weld to match your scope height, even with larger objective lenses and taller rings. It is a simple setup that takes just a few minutes to dial in.




Reviews
There are no reviews yet.