Description
There are mountain rifles, and then there are rifles built by people who clearly spend time in the mountains. The Browning X-Bolt 2 Mountain Pro SPR Carbon Fiber falls into the second camp. Chambered in .300 PRC with a 1:8 twist, it stabilizes the long, heavy-for-caliber bullets that make this cartridge such a standout for elk, moose, and long shots across open country. The 22 inch barrel comes from Preferred Barrel Blanks, using a true carbon fiber wrapping process over a stainless core rather than the cosmetic sleeve construction you see on cheaper builds. It's precision bored, button rifled, and stress relieved, then free floated over a compression molded carbon fiber bedding block for shot-to-shot consistency.
Why the SPR Setup Makes Sense
SPR stands for Suppressor Ready, and Browning trimmed four inches off the standard barrel length so the rifle stays balanced and packable once you spin a can onto the 5/8×24 threads. Until then, the included Recoil Hawg muzzle brake knocks felt recoil down dramatically, which matters when you're running a magnum cartridge in a rifle this light. A color-matched thread protector comes in the box too, so you're covered no matter how you run the muzzle.
Built Around the X-Bolt 2 Action
The second-generation X-Bolt platform brings real upgrades: added bolt guidance surfaces inside the receiver for smoother cycling, a machined-down stainless Pro receiver, spiral fluted bolt, and a featherweight aluminum bolt handle. The DLX trigger is a three-lever design with no creep or overtravel, set at 3.5 pounds from the factory and adjustable down to 3. Feeding comes from Browning's flush-fit rotary magazine holding three rounds, with one more in the chamber.
A Stock That Fits You, Not the Other Way Around
The one-piece carbon fiber stock includes an adjustable comb with a full inch of height range, so getting your eye behind a big objective scope is simple. Length of pull spacers, an Inflex recoil pad, QD sling cups, and an integrated rail up front for a bipod round out a stock that's ready for serious backcountry work. Carbon Gray Cerakote on the metalwork shrugs off weather and keeps glare down when it counts.
Key Specifications
- Manufacturer Part Number: 036084297
- UPC: 023614866015
- Caliber: .300 PRC
- Action: Bolt Action, Long Action
- Barrel Length: 22"
- Barrel: Carbon fiber wrapped stainless steel, free floated
- Twist Rate: 1:8"
- Muzzle Threads: 5/8"-24
- Muzzle Device: Recoil Hawg muzzle brake
- Capacity: 3+1
- Magazine: Detachable rotary, flush fit
- Trigger: DLX three-lever, adjustable 3.0 to 3.5 lbs
- Stock: Carbon fiber with adjustable comb and LOP spacers
- Metal Finish: Carbon Gray Cerakote
- Safety: Two-position tang with bolt unlock button
- Sights: None, drilled and tapped for optics
What’s Included
- Browning X-Bolt 2 Mountain Pro SPR Carbon Fiber rifle
- One 3-round rotary magazine
- Recoil Hawg muzzle brake (installed)
- Thread protector cap
- Comb height and length of pull spacers
- Owner's manual
Frequently Asked Questions
Is the X-Bolt 2 Mountain Pro SPR ready for a suppressor out of the box?
Yes, that's the whole point of the SPR designation. The 22 inch barrel is four inches shorter than the standard Mountain Pro so the rifle stays a reasonable overall length with a can attached, and the muzzle is threaded 5/8×24, which fits most common 30 caliber suppressor mounts. A Recoil Hawg brake comes installed and a thread protector is included for when you swap it off.
How is the carbon fiber barrel on this rifle different from other carbon barrels?
Browning sources these barrels from Preferred Barrel Blanks, and they use a genuine carbon fiber wrapping process over a stainless steel core. That's stiffer and stronger than the sleeve or tube style construction some budget rifles use, which mostly just adds the carbon look. Each barrel is precision bored, button rifled, and stress relieved before wrapping.
Does the Browning X-Bolt 2 Mountain Pro SPR come with a scope or rail?
No optic or scope base is included, and the rifle has no iron sights. The receiver is drilled and tapped for Browning's X-Lock mounting system, which uses four screws per base for a very secure hold. The adjustable comb makes it easy to get proper eye alignment once you mount your glass, even with a large objective scope.
How does the .300 PRC compare to .300 Win Mag in this rifle?
The .300 PRC was designed from the ground up for long, high ballistic coefficient bullets, and the 1:8 twist barrel on this rifle stabilizes them well. That translates to flatter trajectories and better wind performance at distance compared to most .300 Win Mag factory loads. For elk, mule deer, and open country hunting where shots can stretch out, it's a very capable choice.



Reviews
There are no reviews yet.