TacFire Armorer’s Combo Wrench AR-15/AR-10 5.56 .308 Steel TL022

Description

Building or servicing AR-pattern rifles usually means a scattered pile of single-purpose tools, and half of them end up in the wrong caliber category when you switch platforms. The TacFire Armorer's Combo Wrench (TL022) rolls the most common jobs for both 5.56 AR-15 and .308 AR-10 rifles into a single steel-handled unit, which is a big deal if you work on both platforms and don't want to buy the same tool twice.

What the TacFire Combo Wrench Handles

This thing is packed with dedicated interfaces. On the barrel side it covers .223/5.56 barrel nuts, a 1 1/16" NSR barrel nut, .223/5.56 free-float barrel nuts, and .308 free-float barrel nuts, plus barrel extension cutouts for both 5.56 and .308. There's a 3/4" muzzle brake slot, a castle nut wrench, and an AR-15 delta ring assembly removal tool for swapping handguards. Rounding it out are 1/4" and 7/16" hex openings along with 1/4" and 1/2" drivers for the odd fastener that pops up mid-build.

Steel Build for Real Torque

Barrel nut and castle nut work takes real muscle, and a flimsy tool is a fast way to round off a nut or bark your knuckles. The TL022 uses a solid steel handle and steel construction that gives you the leverage to break loose factory-torqued barrel nuts and snug new ones down without flexing. At just over a pound and a half, it has the heft you want when you're leaning on it with a torque wrench or breaker setup.

Whether you're a first-time builder assembling an upper on the kitchen table or an experienced armorer keeping a rack of rifles running, this wrench cuts down the clutter and keeps everything you reach for most in one spot. It's the kind of straightforward, no-frills tool that earns a permanent home on the bench.