Description
The TriggerTech Diamond is the flagship of the lineup, and the two-stage version brings that reputation to shooters who like a little movement before the wall. Built for the Remington 700 platform, it uses TriggerTech's Frictionless Release Technology to give you a break with zero creep. Since that release doesn't lean on coatings, polishing, or lubrication of the key engagement surfaces, the pull stays remarkably consistent from the first shot to well past a few thousand rounds. Once you feel a break this clean, you tend to notice the creep hiding in every other trigger you own.
Dialing In the Diamond Two-Stage
Both stages are user-adjustable, which is a big part of the appeal for precision and PRS-style builds. The first stage runs from under 4 oz up to about 20 oz, and the second stage adjusts from under 4 oz to roughly 24 oz. Adjustment happens through an externally accessible set screw with tactile clicks, starting around 0.2 oz per click in the lighter range so you can fine-tune to your exact preference without pulling the barreled action out of the stock.
Safety and Build Quality on the Diamond Trigger
TriggerTech developed this as the first Rem 700 style trigger with four points of safety, including a ticker blocker and sear blocker that lock things down while on safe. The housing is 7075 anodized aluminum, and the critical internals are hardened 440C stainless steel with a PVD black finish for corrosion resistance and a long service life. This particular unit is the Pro Curved lever in the green with black parts finish, set up for right-hand actions.
One thing worth knowing before you order: the Diamond two-stage is designed for Remington 700 clone actions and ships without a bolt release, so it is not intended for factory Remington 700 actions. If you're building on a clone action for competition, long range hunting, or serious target work, this is about as refined as a drop-in trigger gets, and it's backed by a lifetime warranty.
Key Specifications
- Manufacturer: TriggerTech
- Model: Diamond
- Manufacturer Part Number: R70TGB02TNP
- UPC: 885768001847
- Weapon Platform: Remington 700 Clone Actions
- Trigger Action: Two-Stage
- Trigger Lever: Pro Curved
- 1st Stage Pull Weight: Under 4 oz to 20 oz
- 2nd Stage Pull Weight: Under 4 oz to 24 oz
- Overtravel: Sub .010 inch
- Safety: TriggerTech Four Point (removable)
- Bolt Release: None (clone actions only)
- Housing: 7075 Anodized Aluminum
- Key Components: 440C Stainless Steel, PVD Black
- Finish: Green w/ Black Parts
- Hand: Right Only
- Warranty: Product Lifetime
What’s Included
- TriggerTech Diamond two-stage trigger (Pro Curved, RH)
- Instruction manual
Frequently Asked Questions
Will the TriggerTech Diamond two-stage fit a factory Remington 700?
No. This Diamond two-stage is built for Remington 700 clone actions and ships without a bolt release, so it will not function on a factory Remington 700 action. If you're running a clone action from one of the popular precision manufacturers, you're good to go.
How light can I set the pull weight on this trigger?
The first stage adjusts from under 4 oz up to about 20 oz, and the second stage runs from under 4 oz to roughly 24 oz. Adjustment is done with an externally accessible set screw in tactile clicks, starting around 0.2 oz per click in the lighter range. Keep in mind that pull weight can be affected by your firing pin spring weight, so an overweight spring may push the actual pull above the advertised range.
What makes the Diamond two-stage different from a single-stage trigger?
The two-stage gives you a defined take-up before you hit the wall, which a lot of precision and PRS shooters prefer for load management during a stage. You still get TriggerTech's zero-creep break at the second stage, just with that tactile first-stage movement leading into it. It's really a matter of feel preference between this and the single-stage version.
Is the Diamond trigger durable enough for hunting and harsh conditions?
Yes. The internals are hardened 440C stainless steel with a PVD black coating for corrosion resistance, and the release system doesn't rely on lubrication or coatings on the engagement surfaces, which keeps performance consistent over thousands of rounds. The housing is 7075 anodized aluminum, and it's backed by a product lifetime warranty.





Reviews
There are no reviews yet.