Description
The stock trigger on a Slimline Glock gets the job done, but it is not going to win any awards for feel. That is where the CMC Flat Trigger Kit comes in. CMC shrank down the same patented Signature Flat geometry they perfected on their AR-15 triggers and reworked it to fit the smaller frame of the 9mm Slimline platform, so you get that flat-face leverage advantage in a shoe sized right for a compact carry gun.
What the CMC Flat Trigger Kit Does for Your Glock
The flat face lets your finger index lower on the trigger bow, which gives you a bit more mechanical leverage and a more repeatable placement pull after pull. Folks who run it tend to notice a clean take-up, a smooth predictable wall, and a break that feels crisper than the spongy factory setup. The reset is short and tactile too, the kind you can feel through your fingertip when you are running the gun fast. The wider flat surface is also more comfortable for some hands than the narrow stock trigger, which is worth noting if the OEM shoe never sat right with you.
Built From Real Steel
This is not a plastic swap. The kit is machined from 8620 alloy steel and S7 tool steel, so it holds up to serious round counts without the finish or fit wearing out on you. It wears a matte black finish that blends right into the pistol. Because it is a self-contained one-piece assembly that uses your factory connector and springs, there is no fussy fitting or gunsmithing required.
Fitment and Install on the CMC Flat Trigger Kit
This 71502 model is built for the 9mm Slimline family, and it is widely listed as compatible with the Glock 43, 43X, and 48. Those three share the same trigger, so one kit covers the lineup. Installation is about as simple as Glock work gets: drive out the two pins, pull the factory trigger assembly, drop in the CMC unit, and reinstall the pins. Most people have it done in around ten minutes and are out the door to the range. Always function check and verify your safeties before carrying or shooting.
Key Specifications
- Manufacturer: CMC Triggers
- MPN: 71502
- UPC: 859464006192
- Model: Drop-In
- Fits: Glock 43, 43X, 48 (9mm Slimline)
- Caliber: 9mm
- Trigger Design: Signature Flat, single stage
- Material: 8620 alloy steel and S7 tool steel
- Finish: Matte Black
- Assembly: Self-contained one-piece, drop-in
- Adjustability: Non-adjustable
- Product Type: Trigger
- Length: 7 in
- Shipping Weight: 0.075 lb
What’s Included
- CMC Signature Flat drop-in trigger assembly
- Trigger bar
Frequently Asked Questions
Which Glocks does the CMC 71502 flat trigger kit fit?
It is designed for the 9mm Slimline platform and is commonly listed as compatible with the Glock 43, 43X, and 48. Those three models share the same trigger, so this one kit works across all of them. Fitment notes vary a bit by generation between listings, so it is worth confirming your exact model before ordering.
Is the CMC flat trigger kit hard to install?
Not at all. It is a self-contained drop-in that uses your factory connector and springs, so there is no fitting or gunsmithing involved. You just punch out the two pins, remove the stock trigger assembly, drop in the CMC unit, and reinstall the pins. Most people have it done in about ten minutes, and you should always function check the pistol and its safeties afterward.
Does this trigger lighten the pull weight?
It is not primarily a pull-weight reducer. The flat geometry gives you better leverage and a cleaner, more predictable break and reset, which makes the pull feel smoother even if the weight is similar to stock. If you want a lighter pull, you can pair it with a reduced-power trigger spring and a lighter connector.
What is the trigger made from?
The CMC flat trigger is machined from 8620 alloy steel and S7 tool steel with a matte black finish. That combination is built to hold up through high round counts without wearing out. It is a real steel component, not a plastic replacement shoe.





Reviews
There are no reviews yet.