Description
JK Armament built the War Eagle for folks who want one muzzle device that pulls triple duty. It works as a compensator to keep your muzzle flat, a flash hider to knock down that fireball, and a quick-attach mount for JK Armament suppressors running the Quick Attach Taper Mount 1. That means when you decide to add a can down the road, the hard part is already handled. It's threaded 1/2×28, so it drops right onto your 5.56, .223, or .22LR barrel.
What Sets the War Eagle Apart
The symmetrical design is the real convenience story here. There's no timing, no shims, and no peel washers to mess with. You thread it on, torque it to the recommended 35 ft/lbs, and you're done. It's got wrench flats front and rear, using a 13/16" flat up front and a 3/4" flat in the rear, so you can grab it however your setup lets you. At roughly 1.9 inches long, it's a full-size device that still keeps things reasonable on the end of your barrel.
War Eagle Build and Materials
This one is machined from heat-treated 17-4 stainless steel and finished in black nitride, which is a combo that shrugs off heat and holds up under hard use. Owners running these on AR-15 builds, PCCs, and even 7mm PRC rifles consistently point to easy installs and clean flat-shooting results with no shift in point of impact. It's made in Idaho by a veteran-owned shop, and JK backs their products with a lifetime guarantee.
Running a Suppressor with the War Eagle
One of the smarter perks is that the War Eagle acts as an initial blast baffle once your suppressor is mounted. That takes some of the beating your first baffle would normally absorb and helps stretch the life of your can. If you're already in the JK ecosystem or planning to get there, this device makes the whole setup work together nicely.
Key Specifications
- Manufacturer: JK Armament
- Model: War Eagle
- Manufacturer Part Number: JKMDHDCF28
- UPC: 850017729599
- Thread Pitch: 1/2×28 TPI
- Caliber: 5.56mm / .223 / .22LR
- Material: Heat-Treated 17-4 Stainless Steel
- Finish: Black Nitride
- Length: 1.90"
- Weight: 3.3 oz
- Front Wrench Flats: 13/16"
- Rear Wrench Flats: 3/4"
- Recommended Torque: 35 ft/lbs
- Device Type: Compensator / Flash Hider / QA Suppressor Mount
- Suppressor Compatibility: JK Quick Attach Taper Mount 1
- Origin: Made in USA
What’s Included
- JK Armament War Eagle Compensator/Flash Hider (1/2×28)
Frequently Asked Questions
Does the War Eagle need to be timed during installation?
No, and that's one of the best things about it. The symmetrical design means there's no timing required, so you won't need shims or peel washers. Just thread it on and torque it to the recommended 35 ft/lbs.
Will the War Eagle work as a suppressor mount?
Yes. It's designed to interface with the JK Quick Attach Taper Mount 1, so it doubles as a QA mount for JK Armament suppressors and compatible 1.375×24 HUB attachments. It even acts as an initial blast baffle to help extend the life of your suppressor's first baffle.
What barrels will this 1/2×28 War Eagle fit?
This version is threaded 1/2×28, which is the standard pitch for 5.56, .223, and .22LR barrels. As long as your muzzle is threaded 1/2×28 with the right bore diameter, you're good to go.
What is the War Eagle made of and how durable is it?
It's machined from heat-treated 17-4 stainless steel and finished in black nitride, so it holds up to heat and hard use. JK Armament is a veteran-owned shop in Idaho that backs their products with a lifetime guarantee.



Reviews
There are no reviews yet.