Description
The factory front sight on a Ruger SP101 is a plain black ramp, and plenty of owners will tell you it disappears against a dark target or in low light. That's exactly what this Meprolight Tru-Dot front night sight fixes. It drops a single self-illuminated green tritium element right on your center line, so your eye finds the front post fast and stays locked on it. There's no charging, no batteries, and no fiddling. Tritium glows on its own, and Meprolight backs the illumination with a 12-year warranty.
Why the Tru-Dot Works Day and Night
Tritium sights earn their keep after the sun goes down, but the Tru-Dot pulls double duty. The green vial is ringed with a white outline that catches daylight and gives you a bright, easy-to-see aiming reference on the range. When the light drops, that same dot glows green with no transition needed. Your sight picture looks the same at high noon or midnight, which is a big deal on a defensive revolver where you want one consistent point of aim no matter the conditions.
Built for the SP101
This is a front sight only, machined for Ruger SP101 revolvers chambered in .38 Special and .357 Magnum. It's cut from steel with an anodized black frame, so it shrugs off scratches, dings, and the general beating a carry gun takes. Meprolight has been the OEM and aftermarket choice for law enforcement and military users for decades, and that same reputation follows their revolver sights.
A Word on Installation
Installing the Tru-Dot on an SP101 is a doable home project if you're comfortable with basic tools, but go in knowing the pin hole isn't pre-drilled from the factory. You'll punch out the roll pin with a 1/16-inch punch, clean and set the new sight in the barrel groove with a dab of thread locker, clamp it down, then drill the pin hole through the base using the barrel's existing hole as your guide. Take your time and pad everything in a vise. Folks who aren't keen on drilling their own barrel usually hand it to a gunsmith, and it's a quick job for them.
Key Specifications
- Manufacturer: Meprolight
- Model: Tru-Dot (SP101)
- Manufacturer Part Number: 109923101
- UPC: 840103135878
- Fits: Ruger SP101 (.38 Special / .357 Magnum)
- Sight Position: Front
- Sight Type: Self-Illuminated Fixed Front
- Illumination: Green Tritium
- Tritium Color: Green
- Frame Color: Black
- Material: Steel
- Elevation Adjustment: No
- Warranty: 12-Year Tritium Illumination
What’s Included
- Meprolight Tru-Dot front tritium night sight for Ruger SP101
Frequently Asked Questions
Does the Meprolight Tru-Dot SP101 sight need batteries?
No. It uses a self-powered tritium element that glows on its own with no batteries or charging. Just install it and it stays lit around the clock. Meprolight guarantees the tritium illumination for 12 years.
Is this a full sight set or just the front sight?
This listing is the front sight only. The SP101 uses a fixed rear notch that isn't a tritium sight, so a front tritium dot is the standard low-light upgrade for this revolver. If you want a matched rear tritium sight, you'd be looking at a different platform since the SP101 rear is integral to the frame.
Can I install the Tru-Dot front sight myself?
Yes, if you're handy with tools, though it's more involved than a slide-mounted pistol sight. The factory roll pin gets punched out with a 1/16-inch punch, the new sight is set in the barrel groove, and you drill the pin hole through the base using the barrel's hole as a guide. The hole isn't pre-drilled, so a lot of owners hand it to a gunsmith for the drilling if they'd rather not do it themselves.
Will this fit my .357 Magnum SP101 as well as .38 Special?
Yes. This front sight is made for Ruger SP101 revolvers chambered in both .38 Special and .357 Magnum. Since .357 Magnum revolvers also chamber .38 Special, one sight covers both, just confirm your model is a standard SP101 before ordering.





Reviews
There are no reviews yet.