Description
The polymer frame on a Sig P250 or P320 Compact does its job, but it can get slippery in the hand once your palms sweat or the weather turns. The Talon Grips EV07R fixes that with a single piece of textured black rubber cut specifically for the Compact frame. It wraps the sides, the backstrap, and the area under the trigger guard, so the parts of the grip your hand actually touches get a real, non-slip surface to hold onto.
What makes these worth a look is how little they change the feel of the gun. The material comes in at less than half a millimeter thick, so you get grip without the bulk of a rubber sleeve or a full stippling job. For anyone carrying concealed, that thinness matters, and the rubber texture is soft enough that it rides comfortably against bare skin in an IWB holster instead of chewing at you all day.
Why the EV07R Rubber Texture Works
Talon's rubber is their most popular texture for a reason. It bites when you need it to but stays friendly the rest of the time, which is why so many folks run it on both carry and range guns. It holds up in hot, cold, wet, and dry conditions where a bare polymer grip tends to get slick. If you want something more aggressive, the granulate and PRO textures exist, but rubber is the do-everything choice for most people.
Installing Your Talon EV07R Grip
The grip goes on in a few minutes. You clean the frame with the included prep pad, line up the wrap, press it into place, and hit it with a hair dryer or heat gun so it conforms to every curve. There's more margin for error here than lining up a phone screen protector, so don't sweat it. It's custom cut for an OEM-style fit, made in the USA, and when the day comes to swap it out, it peels off clean without leaving a gummy mess behind.
One quick note before you order: this cut fits the Compact frame. The Subcompact ships with the small module and the full-size uses different sizing, so match your grip module to be sure you get the right fit.
Key Specifications
- Manufacturer: Talon Armament
- Manufacturer Part Number: EV07R
- UPC: 812308020112
- Texture: Textured Rubber
- Color: Black
- Material Thickness: Less than 0.5mm
- Fit: Sig Sauer P250 / P320 Compact
- Coverage: Side panels, backstrap, under trigger guard
- Installation: Adhesive backed, applied with heat
- Country of Origin: Made in the USA
What’s Included
- Talon Grips EV07R adhesive grip wrap
- Cleaning / surface prep pad
- Installation instructions
Frequently Asked Questions
Will the Talon Grips EV07R fit my Sig P320?
The EV07R is cut for the Compact P250 and P320 grip module. Sig's P320 Compact and P250 Compact frames are the target here, so confirm you're running a Compact module and not a Subcompact (small) or full-size before ordering. Matching the grip module to the cut is the key to getting that OEM-style fit.
How do I install the EV07R grip?
Wipe down the frame with the included prep pad, position the wrap, and press it firmly onto the grip. Then run a hair dryer or heat gun over it so the rubber molds to the contours of the frame. The whole process takes just a few minutes and there's plenty of room to adjust as you go.
Does the Talon rubber grip come off cleanly if I want to remove it?
Yes. Talon uses adhesive designed to stick to polymer and hold up over time, but it peels off clean when you're ready to swap or remove it. You won't be left scraping sticky residue off your frame like you would with skateboard tape.
Is the rubber texture comfortable for concealed carry?
It is. The rubber is Talon's most popular texture because it's non-abrasive, which means it feels fine against bare skin in an IWB setup. At under half a millimeter thick it adds grip without printing or bulking up your carry setup.




Reviews
There are no reviews yet.