Description
Most centerfire semi-auto pistols use a tilting-barrel Browning action, and hanging a suppressor off the muzzle adds enough weight to keep the barrel from unlocking properly. That is where this piston earns its keep. The Dead Air Mojave Piston in M16x1 RH lets your Mojave 9 or Mojave 45 float on the booster assembly during recoil, so the barrel can tilt and cycle like the gun was designed to do. Without the right piston, you get sluggish ejection, failures to feed, and a frustrating range day. With it, things just run.
The Right Thread for Your .45 Host
This version is cut for M16x1 right-hand threads with a .45 caliber bore, which is the pattern you will find on hosts like the HK Mark 23 and similar European-threaded .45 pistols. It is built to work inside the PB500 Booster Assembly that ships with both the Mojave 9 and Mojave 45, paired with the internal booster spring. If you already own one of those cans, this piston is all you need to move it over to a metric right-hand threaded .45 host, or to keep a spare on hand so a swap does not sideline your setup.
Mojave Piston Details Worth Knowing
Dead Air machines these pistons to keep the suppressor aligned with the bore while still giving the action the freedom of movement it needs, which matters for both reliability and accuracy. The black nitride treatment adds surface hardness and corrosion resistance, so it holds up to carbon fouling and the general abuse a booster piston sees. Pistons are also wear items by nature, so having a fresh PB446 in the parts drawer is smart insurance if you shoot suppressed .45 regularly.
Match the thread pattern on your barrel to the piston, thread it into the booster housing with the spring, and you are back in business. Simple part, big job, done right.
Key Specifications
- Manufacturer: Dead Air Silencers
- Manufacturer Part Number: PB446
- UPC: 810128161947
- Model: Mojave
- Product Type: Suppressor Piston
- Thread Pattern: M16x1 RH
- Bore / Caliber: .45 Caliber
- Finish: Black Nitride
- Suppressor Compatibility: Dead Air Mojave 9 and Mojave 45
- Booster Compatibility: PB500 Booster Assembly
- Intended Host: Tilting-barrel handguns
What’s Included
- Dead Air Mojave Piston, M16x1 RH, .45 cal bore (PB446)
Frequently Asked Questions
Which suppressors does the Mojave Piston M16x1 RH work with?
It is made for the Dead Air Mojave 9 and Mojave 45. It installs into the PB500 Booster Assembly that comes standard with both of those suppressors, along with the internal booster spring. It is not a standalone booster, so you need that assembly to run it.
Do I need this piston if my pistol has a fixed barrel?
No, the piston setup is for tilting-barrel Browning-action pistols, which covers most centerfire semi-autos. On a fixed-barrel host you would run the Mojave with the fixed barrel spacer instead, since there is no barrel movement that needs the booster action.
What guns use M16x1 right-hand threads in .45?
The M16x1 RH pattern shows up on hosts like the HK Mark 23 and other European-threaded .45 pistols. Check the thread spec stamped or listed for your barrel before ordering, because Dead Air also makes this piston in M16x1 LH and .578×28 for other .45 hosts. Right-hand versus left-hand thread matters, so verify which one your barrel uses.
How does a booster piston help my pistol cycle with a suppressor?
The added weight of a suppressor can stop a tilting barrel from unlocking during recoil, causing malfunctions. The piston lets the suppressor briefly decouple from the barrel under recoil so the action cycles normally. It keeps the can aligned with the bore while giving the barrel the freedom it needs to tilt and feed reliably.




Reviews
There are no reviews yet.