Description
The green fiber optic pipe on this Wilson Combat front sight does exactly what you want it to do: it grabs your eye and pulls it straight to the front post. On the older factory blade, that bright green dot makes a real difference in low light, on dark targets, or when you're running the gun quickly. It's built for the new 2020 Colt Python and Anaconda revolvers and comes in at .180 inches tall and .125 inches wide, the same height as the factory sight so your point of impact stays where Colt set it.
What Sets This Python/Anaconda Front Sight Apart
The blade itself has a snag-free ramped profile with serrations across the face. The serrations cut glare so the green fiber stays the brightest thing in your sight picture, and the rounded, snag-free shape means it won't hang up coming out of a holster or bag. If you run the Wilson Combat adjustable rear sight, this front pairs with it perfectly, but it works just as well against the stock Colt rear.
Installing the Wilson Combat Green Fiber Optic Sight
Colt made this an easy job. There's a single set screw holding the front sight in place, so you back it out, lift the old sight, drop the new one into the recess flush with the barrel rib, and snug the screw back down. Wilson ships it with a fresh retention screw and the wrench you need, so you've got everything in the box. Owners regularly report having the whole swap done in a couple of minutes with no gunsmithing required, though a dab of blue threadlocker is a nice touch if you want it locked in for good.
Bottom line, this is one of the simplest, highest-payoff upgrades you can make to a 2020 Python or Anaconda. You keep the factory sight geometry, ditch the plain black blade, and gain a fiber optic aiming point that shows up fast in just about any light.
Key Specifications
- Manufacturer: Wilson Combat
- Manufacturer Part Number: 1053FOG180
- UPC: 810025509385
- Fits: Colt Python / Anaconda (2020 frame)
- Sight Type: Front Sight
- Style: Snag-Free Fiber Optic
- Fiber Optic Color: Green
- Frame/Blade Color: Black
- Height: 0.180 in
- Width: 0.125 in
- Blade Profile: Serrated Ramped Blade
- Firearm Type: Handgun / Revolver
What’s Included
- Wilson Combat green fiber optic front sight (.180 in)
- New retention screw
- Installation wrench
Frequently Asked Questions
Will this Wilson Combat front sight fit my older Colt Python?
This sight is made specifically for the new 2020-frame Colt Python and Anaconda revolvers. It won't fit the vintage snake guns from earlier production runs. Some owners have also fit it to newer Cobra and King Cobra models, though fit can vary slightly, so check your model before ordering.
Do I need a gunsmith to install the green fiber optic front sight?
Most owners handle this one at home in just a few minutes. Colt used a single set screw to retain the front sight, so you loosen it, remove the old blade, drop in the Wilson sight flush with the barrel rib, and tighten it back down. The screw and wrench come in the box, and a bit of blue threadlocker will keep it secure if you want it permanent.
Will this change where my Python or Anaconda hits?
It shouldn't. The sight measures .180 inches tall, the same as the factory front sight, so your point of impact stays put. You're keeping the original sight geometry and simply upgrading from a plain black blade to a green fiber optic aiming point.
How does the green fiber optic compare to the factory sight?
The bright green fiber pulls your eye to the front post much faster than the plain factory blade, which really helps in low light and against dark targets. The serrated ramp cuts glare so the dot stays crisp. It's one of the most noticeable upgrades you can make for quick target acquisition on the 2020 Colt revolvers.





Reviews
There are no reviews yet.