0
0

Strike Industries GRIDLOK 416 Full Duty 16″ M-LOK Handguard – HK416

UPC: 793811764741

$405.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Strike Industries GRIDLOK Full Duty rail brings a level of speed and modularity to the HK416 family that factory rails just can't match. Built for the HK416, HK416 A5, HK416 A7, MR556, and M27 IAR platforms, it mounts directly onto the factory HK OEM barrel nut and locks in place with the patent-pending Quick Rail Detach GRIDLOK latch. A quick push and pull of the QD latch and the handguard comes off in seconds, which makes tuning an adjustable gas block or pulling a suppressor a whole lot less of a chore.

What Sets the GRIDLOK 416 Full Duty Apart

This is a one-piece free-float design machined from 6061-T6 aluminum, so you get real strength without carrying dead weight out front. The Full Duty version runs a full-length 1913 Picatinny rail across the top, giving you a continuous surface for optics, night vision, lasers, and backup irons. Speaking of which, there's a flip-up front backup iron sight built right into the nose of the rail, so your emergency sighting solution is already handled before you bolt on a single accessory.

Building Out Your Rail

M-LOK slots sit at the 3, 6, and 9 o'clock positions for lights, grips, bipods, and hand stops, and four 360-degree free-swivel QD sockets at the rear cover sling setups at the 2, 4, 8, and 10 o'clock positions. The front of the rail is cut to clear suppressors up to 1.57 inches in diameter, and it plays nice with Strike Industries muzzle devices including the OPPRESSOR line if you're chasing that tucked look. A rear rail tab indexes into the HK upper receiver to keep your top rail centered and true.

The real appeal here is flexibility. Run one GRIDLOK as your primary and keep your OEM HK rail as a backup, or stack a few different lengths and switch between a short CQB build and a longer marksman setup without ever changing rifles. Mission dictates gear, and this rail lets your rifle keep up.

Key Specifications

  • Manufacturer: Strike Industries
  • Manufacturer Part Number: GRIDLOK416FD16
  • UPC: 793811764741
  • Length: 16 inches
  • Outer Diameter: 1.57 inches
  • Material: 6061-T6 Aluminum
  • Finish: Black
  • Attachment Interface: M-LOK at 3, 6, and 9 o'clock
  • Top Rail: Full-length 1913 Picatinny
  • Mounting: Factory HK OEM barrel nut
  • QD Sockets: Four 360-degree free-swivel at 2, 4, 8, 10 o'clock
  • Backup Sight: Integrated flip-up front BUIS
  • Design: One-piece free-float
  • Compatibility: HK416 / HK416 A5 / HK416 A7 / MR556 / M27 IAR

What’s Included

  • 1x GRIDLOK Rail for 416 (fully assembled)
  • 1x Locking lever tool

Frequently Asked Questions

Which rifles does the GRIDLOK 416 Full Duty handguard fit?

It's designed for the HK416, HK416 A5, HK416 A7, MR556, and M27 IAR platforms. It mounts directly to the factory HK OEM barrel nut, so no proprietary nut swap is needed. Note that it's built for models without ambidextrous sling attachment points.

How does the Quick Rail Detach system work on the GRIDLOK 416?

The rail uses a patent-pending GRIDLOK locking latch that lets you push and pull to release the handguard in seconds. This makes it easy to reach an adjustable gas block or install and remove a suppressor without a full teardown. You can also keep multiple GRIDLOK rails on hand and swap configurations between missions or range sessions.

Does the GRIDLOK 416 Full Duty come with a front sight?

Yes, a flip-up front backup iron sight is built right into the nose of the rail. That means your backup sighting solution is already covered before you add any other accessories. Pair it with a rear BUIS on the full-length top rail for a complete iron sight setup.

Will this handguard clear a suppressor?

The front of the rail is cut to accommodate suppressors up to 1.57 inches in diameter. It's also compatible with Strike Industries muzzle devices, including the OPPRESSOR line for a tucked appearance. Just confirm your can's diameter falls within that clearance before setup.

Additional information

UPC

793811764741

Manufacturer

Manufacturer Part Number

GRIDLOK416FD16

Reviews

There are no reviews yet.

Be the first to review “Strike Industries GRIDLOK 416 Full Duty 16″ M-LOK Handguard – HK416”