Description
The TruGlo Glo-Dot II TG-TG92B takes the plain factory bead on your .410 and turns it into something you can actually pick up fast. It uses a red fiber optic element to gather ambient light and glow, so instead of squinting to find a tiny metal bead against a busy background, your eye locks onto a bright dot. That matters when a bird flushes or a clay is climbing and you only have a split second to get on target.
This one is built specifically for plain barrel .410 gauge shotguns, meaning barrels without a ventilated rib. It slips onto the muzzle end and slides back until the alignment notch butts up against your existing front bead, which holds it in place and keeps everything lined up. Folks who have used these say installation is genuinely a snap, no tools or gunsmithing needed, and once it is seated on the barrel it stays put and doesn't wiggle around during shooting.
What the Glo-Dot II Does on the Range
The low-profile design sits close to the barrel so it doesn't clutter your sight picture or add bulk up front. Because the whole thing pops on and off, it's easy to move between plain barrel guns if you have more than one, which makes it handy for anyone running clays, small game, or teaching a newer shooter who needs an easier reference. TruGlo built its name on fiber optic and tritium sights, and this line has long been popular with hunters, even earning a Ducks Unlimited endorsement.
Getting the Most Out of the TG-TG92B
Fiber optic feeds on light, so this sight really shines outdoors and in daylight. It gives you a clean, obvious dot for wingshooting and casual clays where quick target acquisition is the whole game. Take your time seating it straight the first time and it'll reward you with a bright, repeatable aiming point that beats staring at a bare bead.
Key Specifications
- Manufacturer: TRUGLO
- Model: Glo-Dot II Universal
- Manufacturer Part Number: TG92B
- UPC: 788130111994
- Style: Fiber Optic Front Sight
- Fiber Color: Red
- Gauge: .410
- Barrel Fit: Plain (non-ribbed) barrel
- Mounting: Snap-on over existing front bead
- Profile: Low profile
- Firearm Type: Shotgun
What’s Included
- TruGlo Glo-Dot II TG-TG92B red fiber optic front sight
Frequently Asked Questions
How does the Glo-Dot II attach to my .410?
It slides onto the muzzle end of the barrel and pushes back until its alignment notch seats against your existing front bead. No tools or gunsmithing are needed, and the fit is snug enough that it holds firmly and doesn't shift while shooting. Users describe the install as literally a snap.
Will the TG-TG92B fit a barrel with a ventilated rib?
No, this model is made for plain (smooth, non-ribbed) .410 barrels. If your shotgun has a vented rib, you'll want a sight designed to straddle or clamp onto the rib instead. Check your barrel before ordering to make sure it's a plain barrel setup.
Does the red fiber optic dot glow in the dark?
Fiber optic gathers ambient light rather than powering itself, so the Glo-Dot II is brightest in daylight and outdoor conditions. It won't light up in total darkness the way a tritium sight would. For daytime wingshooting and clays, that red dot really jumps out.
Can I move the Glo-Dot II between different shotguns?
Yes, since it snaps on and off, you can move it between plain barrel guns of the same gauge fit. That makes it convenient if you swap barrels or want to try it on more than one .410. Just seat it straight each time for a consistent aiming point.





Reviews
There are no reviews yet.