Description
If you shoot anything in the 6mm to 7mm family, from a 6mm Creedmoor to a 6.5, a .270, or a 7mm mag, these Pro-Shot patches are cut to the right size to do the job without fuss. Each one is a 1.38-inch square of 100 percent cotton flannel, tightly woven with a high thread count so it grabs solvent and carbon instead of just smearing it around. The double-napped finish on both sides means you can flip a patch and get a second pass out of it, which adds up fast when you're running a full cleaning cycle.
Why the 6mm-7mm Sizing Matters
Patch fit is where a lot of folks go wrong. Too small and the patch glides past the fouling without touching the grooves. Too tight and you're fighting the rod and squeezing all the solvent out before it does any good. This 1.38-inch square hits the sweet spot for 6mm through 7mm bores when wrapped on a properly sized jag, giving you firm, even contact all the way down the barrel. A common trick is to spear the patch off center, about halfway toward a corner, so it seats snug without doubling up on the jag.
What Sets These Pro-Shot Patches Apart
Cotton flannel is still the gold standard for pulling residue out of a bore, and Pro-Shot builds these from American-grown cotton with an American design. The material handles standard bore solvents and CLPs, breaks down carbon and copper fouling, and lifts it out with minimal abrasive contact against the rifling. That tight weave also keeps lint down, so you're not leaving fuzz behind on every pass.
The 500-count bag is the reason a lot of people buy these. Whether you're cleaning after every range trip, prepping for a match, or just keeping a bench stocked, that's a serious supply of patches that'll last you a long while before you need to reorder.
Key Specifications
- Manufacturer: Pro-Shot
- Manufacturer Part Number: 138500
- UPC: 709779500055
- Patch Size: 1.38 in square (1 3/8")
- Caliber Range: 6mm to 7mm rifle bores
- Material: 100% cotton flannel
- Finish: Double-napped on both sides
- Color: White
- Quantity: 500 per package
- Country of Origin: Made in USA, American-grown cotton
What’s Included
- 500 Pro-Shot 1.38 inch cotton flannel cleaning patches (6mm-7mm)
Frequently Asked Questions
What calibers do the 6mm-7mm Pro-Shot patches fit?
These 1.38-inch patches are sized for rifle bores in the 6mm through 7mm range. That covers popular rounds like 6mm Creedmoor, 6.5 Creedmoor, .260, .270, and 7mm magnums. Actual fit always depends on the jag you pair them with, so you may need to tweak how you seat the patch for the perfect tension.
Should I use these on a jag or a slotted tip?
A jag is the way to go if you want firm, even bore contact and the best fouling removal. Pierce the patch off center, roughly halfway toward one corner, so it wraps snug without bunching up on the jag. A slotted tip works in a pinch but won't scrub as thoroughly as a jag will.
Are these good for both wet and dry cleaning passes?
Yes. The cotton flannel soaks up bore solvent and CLP well for your wet passes, then does an equally good job running dry to pull the loosened fouling out. Use a fresh patch on each pass rather than reusing a dirty one for the cleanest result.
Will 500 patches last a long time?
For most people, yes, this is a stock-up quantity. A typical cleaning session might use anywhere from a handful to a dozen patches depending on how fouled the bore is, so 500 will carry you through many range days and match preps before you need more.




Reviews
There are no reviews yet.