Description
A dirty bore robs accuracy, and the Pro-Shot R2707KIT Classic Rifle Cleaning Kit gives you the tools to stay ahead of the fouling. It's built specifically for .270 caliber and 7mm rifles, with the jag, mop, and bore care sized to match so you get proper contact against the lands without any guesswork. Everything lives in a black plastic case that keeps the small pieces from wandering off between cleanings.
What Sets the R2707KIT Classic Kit Apart
The heart of this kit is Pro-Shot's premium stainless steel cleaning rods, micro-polished to a 32.5-inch total working length. That polished surface matters more than folks realize, since a rough rod picks up grit and drags it right back down your barrel. The rod sections thread together cleanly and pair with a full-size swivel handle, so patches and brushes can follow the natural twist of the rifling instead of fighting it. All the rifle accessories run the standard #8-32 thread, which means you can add caliber-specific brushes and jags down the road without hunting for oddball fittings.
Bore Care Inside the .270/7mm Cleaning Kit
Along with the rods you get a .270/7mm brass cleaning jag, a matching cotton mop, and a patch holder that handles .27 caliber and up. A brass muzzle guard protects your crown while you work, which is cheap insurance for the most accuracy-critical part of the barrel. Pro-Shot rounds it out with their 1-Step gun cleaner and lubricant, 100% cotton flannel patches, a double-ended nylon bristle brush, Pro-Gold grease, and a silicone-treated cloth for wiping down metal and keeping rust at bay.
This is a solid all-in-one setup for anyone who wants to take care of a hunting rifle or precision gun the right way. The brass and cotton components are gentle on your bore, and the hard case makes it easy to grab and go when you head to the range or deer camp.
Key Specifications
- Manufacturer: Pro-Shot
- Manufacturer Part Number: R2707KIT
- UPC: 709779400881
- Caliber/Gauge: .270 Cal / 7mm
- Rod Material: Micro-Polished Stainless Steel
- Rod Working Length: 32.5 in (82.55 cm)
- Thread Pattern: #8-32
- Handle: Full-Size Swivel Handle
- Case Material: Plastic
- Patch Material: 100% Cotton Flannel
What’s Included
- Premium stainless micro-polished cleaning rods (32.5 in total working length)
- Full-size swivel handle
- Patch holder (.27 Cal & up)
- .270/7mm brass cleaning jag
- .270/7mm cotton mop
- Brass muzzle guard
- Double-ended nylon bristle gun brush
- 1-Step gun cleaner & lubricant
- 100% cotton flannel cleaning patches
- Pro-Gold grease
- Silicone-treated gun cloth
- Black plastic storage case
Frequently Asked Questions
What calibers does the Pro-Shot R2707KIT cleaning kit cover?
This kit is set up for .270 caliber and 7mm rifles, with the jag and cotton mop sized to match those bores. Some packaging also lists 6.8mm compatibility since it falls in the same range. If you shoot a .270 Winchester, 7mm Rem Mag, or similar, this is the right fit.
Are the rods one piece or do they screw together?
The rods come as sections that thread together seamlessly into a 32.5-inch working length. That makes them easy to store in the case and lets you run the full length for cleaning from the chamber end. The micro-polished stainless finish helps keep grit from clinging to the rod and scratching your bore.
Can I add extra brushes or jags to this kit later?
Yes. All the rifle accessories use the standard industry #8-32 thread, so Pro-Shot brushes, jags, and mops in that pattern will thread right on. That makes it easy to expand the kit if you pick up rifles in other calibers down the road.
Does the R2707KIT include cleaning solvent and lube?
It does. You get Pro-Shot's 1-Step gun cleaner and lubricant, which handles cleaning and protection in one product, plus Pro-Gold grease for high-wear points. A silicone-treated cloth is also included for wiping down exterior metal and helping fend off rust.




Reviews
There are no reviews yet.