$16.99
9 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Strike Industries ISO Tab solves a specific problem that anyone running a latchless charging handle knows well: the low-profile design that makes those handles so slick can be tough to grab in a hurry. This tab bolts onto the side of your Strike Latchless Charging Handle and gives you an enlarged, textured contact surface that is far easier to hook a finger on. Built from 6061-T6 aluminum, it holds up to hard use while adding almost nothing to the weight of your rifle.
The aggressive texturing and wider surface area are the whole point here. When you are wearing gloves, working in the cold, or running an optic that partially crowds the charging handle, that extra real estate lets you clear the bolt or perform a chamber check without fumbling. The tab also sits at a slight tilt once installed, which gives you a more positive engagement when you reach for it.
The ISO Tab is fully ambidextrous, so you can run it on the left side, the right side, or install one on each side if you want purchase from both directions. Installation is quick with the included screw, and it is worth grabbing some thread locker before you button it up so it stays put through recoil and repeated charging. Keep in mind this piece is designed to work only with the Strike Industries Latchless Charging Handle, and the handle itself is sold separately.
The Flat Dark Earth anodized finish blends into most modern builds and holds up against wear. Folks who run these tend to keep them on every build, pairing the ISO Tab with the latchless handle as a go-to setup. Each unit adds roughly a third of an inch of width per side, so you get noticeably more to grab onto without turning your charging handle into a bulky mess. For a small part, it makes a real difference in how quickly and confidently you can run the gun.
No, the ISO Tab is designed specifically for the Strike Industries Latchless Charging Handle and will not fit standard AR-15 charging handles. If you are running the Strike latchless handle, it bolts right on. The charging handle itself is not included and is sold separately.
Yes. The tab is fully ambidextrous, so you can mount one on the left, the right, or install one on each side for grip from both directions. Each tab adds roughly a third of an inch of width per side, giving you noticeably more surface to grab.
It attaches with the included screw and goes on in a couple of minutes with basic tools. Applying thread locker before installation is a good idea so it holds up to repeated charging and recoil without backing out over time.
That is exactly what it was built for. The enlarged, textured surface gives you something solid to hook onto when a bulky optic crowds the handle or when you are working with gloved or cold hands. It makes clearing the bolt and chamber checks a lot less fiddly.
| UPC | 708747547122 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | ISOTABFDE |
| Model | |
| Product Type | AR15 Upper Part |
You must be logged in to post a review.
Reviews
There are no reviews yet.