Description
The Strike Industries AR-LATCH is one of those small upgrades that punches way above its size. Instead of buying a whole new charging handle, you just swap out the stock latch for this extended aluminum version and instantly get more surface to grab onto. That extra real estate makes a real difference when you're wearing gloves, running a support-side charge, or dealing with slick or frozen hands out in the field.
What Sets the AR-LATCH Apart
A lot of extended latches on the market are steel, and steel latches can chew up the softer aluminum of your upper receiver over time. Strike Industries went a different route here. This is the first extended latch built from aluminum, so it plays nice with your receiver and keeps things lightweight at the same time. You get the fatter grasping surface you want without adding meaningful weight or beating up your gun.
Fit and Installation of the Strike Industries Extended Latch
The AR-LATCH is designed to drop onto standard mil-spec charging handles, and it's built to co-exist with the Strike Industries ARCH charging handle for folks already running that setup. Installation is straightforward and doesn't call for a gunsmith. You knock out the roll pin holding your existing latch, drop in the AR-LATCH, and reinstall the pin. Ten minutes with the right punch and you're back in business.
The Blue Anodized Look
Beyond the function, the blue hard anodized finish gives your build a little personality. It's a clean way to add a splash of color to an otherwise all-black rifle, and it pairs well with other blue-accented Strike Industries parts like takedown pins and magazine releases if you're chasing a matched look. Keep in mind anodized colors can shift slightly batch to batch, which is normal for the process. For a low-cost, no-drama ergonomics boost, this latch is tough to beat.
Key Specifications
- Manufacturer: Strike Industries
- Manufacturer Part Number: ARLATCHBLU
- Model: AR-LATCH
- UPC: 708747545166
- Product Type: Charging Handle Extended Latch
- Material: Aluminum
- Finish: Blue Hard Anodized
- Color: Blue
- Platform: AR-15 / AR-Platform
- Compatibility: Standard Mil-Spec charging handles, including the SI ARCH
- Gunsmithing Required: None
What’s Included
- 1x Strike Industries AR-LATCH Extended Charging Handle Latch
Frequently Asked Questions
Does the AR-LATCH fit any charging handle or just Strike Industries?
It's designed to fit standard mil-spec AR-15 charging handles, so it works with most factory and aftermarket handles out there. It also co-exists with the Strike Industries ARCH handle if you're running one. As long as your charging handle uses a standard latch and roll pin, you should be good to go.
Why is the AR-LATCH made of aluminum instead of steel?
Aluminum keeps the latch light and, more importantly, it won't wear down the aluminum of your upper receiver the way steel latches can over time. Strike Industries built this as the first aluminum extended latch for exactly that reason. You get the bigger grasping surface without the accelerated receiver wear.
Is installing the extended latch difficult?
Not at all. You punch out the roll pin that holds your existing latch, drop in the AR-LATCH, and reinstall the pin. No gunsmith needed, and it's usually a five to ten minute job with a proper roll pin punch.
Will the blue finish exactly match my other blue AR parts?
It'll get you close, but anodized colors can vary slightly from batch to batch, which is just the nature of the anodizing process. If you're building a fully color-matched rifle, sticking within the Strike Industries blue accessory line gives you the best odds of a clean match. In most builds the difference is minor and hard to spot.




Reviews
There are no reviews yet.