Description
Grip screws are one of those small parts that make a big difference on a 1911. These stainless steel Torx screws from Strike Industries give you a secure, clean-looking way to lock your grip panels down, whether you're refreshing an old carry gun or putting the finishing touches on a custom build. They're machined to standard 1911 spec, so they drop right in where your factory screws came out.
What Sets These 1911 Torx Grip Screws Apart
The big draw here is the T15 Torx head. Compared to the old slotted screws that came on a lot of 1911s, a Torx interface bites deep and resists cam-out, so you're far less likely to bugger up the heads when you're snugging grips down or pulling them apart to clean. The recessed Torx pattern also gives the screw a tidier, more modern look than a plain slot. These run a standard profile at 0.343" height, 0.269" head diameter, and a 0.150"-50 TPI thread.
Stainless Build That Holds Up
Made from 100% stainless steel, this set shrugs off the sweat, humidity, and holster wear that eats up cheaper hardware over time. The stainless finish keeps a bright, classic look that pairs well with just about any grip material, from wood and G10 to micarta and polymer. Owners of Colt, Remington R1, Kimber, and various 1911 clones have found the thread pitch and depth to be a spot-on match.
A Simple Upgrade for Any 1911 Build
Installation is about as easy as it gets. Back out your old screws with the right driver, thread these in, and you're done. You'll want a T15 Torx bit to run them, which is worth having in your kit anyway if you're doing any 1911 tinkering. For a small, no-fuss part, they add a surprising amount of polish to the finished pistol.
Key Specifications
- Manufacturer: Strike Industries
- Manufacturer Part Number: SI-1911TS-SS
- UPC: 700371178703
- Model: 1911
- Product Type: Grip Screws
- Material: 100% Stainless Steel
- Finish: Stainless
- Head Type: Torx (T15 driver required)
- Profile: Standard
- Height: 0.343 in
- Head Diameter: 0.269 in
- Thread: 0.150 in – 50 TPI
- Quantity: 4 Screws
- Fitment: 1911 Platform
What’s Included
- 4 x Stainless Steel Torx Grip Screws
Frequently Asked Questions
What size Torx driver do these 1911 grip screws need?
You'll need a T15 Torx bit to install and remove these standard-profile screws. A T15 is a common size, so most gunsmithing bit sets will have one. It's a handy bit to keep around if you plan on doing any regular work on your 1911.
Will these Strike Industries grip screws fit my 1911?
They're machined to standard 1911 spec with a 0.150"-50 TPI thread, so they fit the vast majority of full-size 1911s and clones. Owners have reported clean fits on Colt, Remington R1, Kimber, and other common builds. If your pistol uses standard grip screw bushings, these should thread right in.
Are these standard or slimline screws?
This set is the standard profile version, which is what most 1911 grips use. Strike Industries also made a slimline version for thin grip panels, so double-check which style your grips call for before ordering. For factory-style and most aftermarket panels, standard is the one you want.
Do these grip screws come with bushings?
No, this package includes four stainless steel Torx grip screws only. The matching grip screw bushings are sold separately. If your existing bushings are in good shape, you can reuse them with these new screws.




Reviews
There are no reviews yet.