0
0

XS Sights Standard Dot Tritium Front Sight – S&W J-Frame/SP101 Green

UPC: 647533000611

$68.89

8 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The factory front sight on most J-Frame and SP101 revolvers is a thin, low-contrast blade that's tough to pick up quickly, especially as the light drops or your eyes get a few years on them. This XS Standard Dot swaps that out for a bright green tritium dot sitting in a green outline, giving you a clear aiming reference in bright sun, fading dusk, and full dark. The glow dot is convex, so it pulls in ambient light and charges up to stay visible when the sun goes down, backed by the tritium element for true no-light glow.

Why the Standard Dot Beats the Big Dot on a Snubby

XS makes this front in two sizes, and the Standard Dot is the pick for most J-Frame and SP101 owners running a fixed rear sight. The dot measures 0.140 inches, which is large enough to grab your eye under stress but small enough that it doesn't bury your target. Folks who've installed it consistently mention that the standard dot fills the square rear notch just about perfectly, where the Big Dot can feel like too much for that sight picture. To aim, you drop the bottom of the dot into the bottom of the sight channel and center it over your target, which works out to reliable hits inside 15 yards.

Built and Installing the XS Standard Dot Front Sight

The body is CNC-machined from solid steel bar stock at the XS shop in Fort Worth, so it holds up to hard use and years of carry. The kit ships with the front sight, a new retaining pin, and red thread locker to keep everything put. Installation on a fixed-rear J-Frame or SP101 does require drilling the retaining pin hole in the sight body, so you'll want a tiny drill bit (a #54 is commonly cited) and a 1/16 inch punch, or hand it to a gunsmith. It's a fiddly job but a very doable one for a competent DIY type, and plenty of owners have had it swapped in within a few minutes once the old sight is out.

If you've been fighting a black-on-black front sight on your carry wheelgun, this is one of the most popular upgrades out there for good reason.

Key Specifications

  • Manufacturer: XS Sights
  • Manufacturer Part Number: RV0003N4G
  • UPC: 647533000611
  • Model: Standard Dot Tritium Front Sight
  • Fits: S&W J-Frame / Ruger SP101 (fixed rear)
  • Front Sight Type: Tritium night sight, front only
  • Tritium Color: Green
  • Outline Color: Green
  • Dot Diameter: 0.140 in
  • Sight Height: 0.180 in
  • Sight Length: 0.600 in
  • Body Material: CNC-machined steel
  • Finish: Matte black
  • Installation: Pin hole must be drilled; gunsmith recommended

What’s Included

  • Standard Dot tritium front sight
  • New retaining pin
  • Red thread locker
  • Instruction insert

Frequently Asked Questions

Will the XS Standard Dot front sight fit my S&W J-Frame or Ruger SP101?

Yes, this front sight is made for Smith & Wesson J-Frame and Ruger SP101 revolvers that use a fixed rear sight. It replaces the thin factory front blade with a much more visible tritium dot. If your revolver has an adjustable rear sight setup, double-check the fit before ordering, as this is designed around the fixed-rear models.

Is the Standard Dot or the Big Dot better for a snubby revolver?

The Standard Dot, with its 0.140 inch dot, is the go-to for most J-Frame and SP101 owners because it fills the square rear notch cleanly without covering too much of the target. The Big Dot is larger and faster to catch the eye, but many find it a bit much for the standard rear sight picture on these small revolvers. For a fixed-rear snubby, the Standard Dot tends to give the more balanced sight picture.

How hard is the XS Standard Dot front sight to install?

On a fixed-rear J-Frame or SP101, you drive out the factory retaining pin, fit the new sight, then drill the retaining pin hole through the sight body and pin it in place with the included thread locker. It's a fiddly job that usually calls for a very small drill bit (a #54 is commonly mentioned) and a 1/16 inch punch. Handy DIY folks have done it at the bench in minutes, but if you're not comfortable drilling, a gunsmith can knock it out quickly.

Does this tritium front sight glow in the dark, and how long does it last?

It does. The green tritium element provides a self-powered glow in full darkness, and the convex glow dot also soaks up ambient light to stay bright in low-light conditions. Tritium naturally dims over many years of use, so expect a strong glow for roughly a decade before it noticeably fades.

Additional information

UPC

647533000611

Manufacturer

Manufacturer Part Number

RV0003N4G

Color

FRONT NIGHT SIGHT GREEN

Length

8.1500

Model

Shipping Weight

0.115

Style

Standard Dot Tritium Front Sight

Reviews

There are no reviews yet.

Be the first to review “XS Sights Standard Dot Tritium Front Sight – S&W J-Frame/SP101 Green”