0
0

Streamlight TLR-6 White LED & Red Laser for Kimber Micro (69276)

UPC: 080926692763

$130.99

11 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Streamlight TLR-6 was built for exactly one job: giving a subcompact carry pistol like the Kimber Micro a light and laser without turning it into a brick. This version clamps directly to the trigger guard of the Micro series, so you get real illumination and a red aiming dot on a gun that was never designed to wear a full-size rail light. It runs a C4 white LED putting out 100 lumens with 2,000 candela and an 89-meter beam, paired with a 640 to 660 nm red laser for quick target acquisition when the lights go down.

What the TLR-6 Brings to a Kimber Micro

Control is dead simple. Ambidextrous push-button switches sit on both sides, and you can toggle between three modes: LED only, LED and laser together, or laser only. On the combo setting you'll get about an hour of regulated runtime, while running the laser by itself stretches battery life out to roughly 11 hours. A 10-minute auto shut-off is there to keep you from draining the two CR1/3N lithium cells if you bump a button in the safe.

Battery Swaps and Zero Retention on the TLR-6

One of the smartest features is tool-less battery replacement. You can pull and swap the batteries without ever taking the light off the gun, and there's no need to re-sight the laser afterward. The windage and elevation screws ride in brass bushings, which is what gives it that dependable zero hold over time. The housing is impact-resistant polymer with a glass lens and shock-resistant gasket seal, and it carries an IPX4 water-resistant rating along with a 1-meter impact test.

Fit Notes Worth Knowing

Most folks running a Kimber Micro report a snug, secure fit and a five-minute install once the trigger guard drops into the grooves. A handful of Micro 9 owners have mentioned the rear contour sitting slightly proud compared to the Micro .380, so it's worth checking your specific frame. At just over an ounce, it stays light enough that it won't drag down your draw or throw off the balance that makes the Micro such an easy everyday carry.

Key Specifications

  • Manufacturer: Streamlight
  • Manufacturer Part Number: 69276
  • UPC: 080926692763
  • Fits: Kimber Micro series
  • Light Output: 100 lumens
  • Peak Beam Intensity: 2,000 candela
  • Beam Distance: 89 meters
  • Bulb Type: C4 White LED
  • Laser: 640-660 nm Red
  • Modes: LED only, LED/laser combo, laser only
  • Runtime: 1 hr (LED or combo); 11 hrs (laser only)
  • Battery: (2) CR1/3N lithium (included)
  • Water Resistance: IPX4
  • Weight: 1.27 oz
  • Color: Black
  • Mount Type: Trigger Guard Mount

What’s Included

  • Streamlight TLR-6 light/laser module (Kimber Micro fit)
  • Two CR1/3N lithium batteries
  • Key/tool for installation
  • Product instructions

Frequently Asked Questions

Will the TLR-6 fit both my Kimber Micro .380 and Micro 9?

This model is designed for the Kimber Micro series and clamps to the trigger guard. It fits the Micro .380 very cleanly, and most Micro 9 owners get a solid mount as well. A few Micro 9 users have noted the rear contour sitting slightly proud, so it's smart to double-check your exact frame during install.

How bright is the TLR-6 and how far will it throw light?

The C4 LED puts out 100 lumens with 2,000 candela and reaches about 89 meters. That's plenty for identifying threats and lighting up rooms in a home-defense scenario. Users consistently describe the beam as a clean, bright white rather than a yellow tint.

Do I have to remove the light to change the batteries?

No, and that's one of the best parts. The TLR-6 uses tool-less battery replacement so you can swap the two CR1/3N cells while it stays mounted on the gun. Even better, you won't need to re-sight the laser afterward since the zero holds through the swap.

Can I adjust the red laser for windage and elevation?

Yes, the TLR-6 has windage and elevation adjustment screws mounted in brass bushings for reliable zero retention. Take your time dialing it in and make small, deliberate turns. There's a good range of travel to get the dot exactly where you want it.

Additional information

UPC

080926692763

Manufacturer

Manufacturer Part Number

69276

Color

Black

Length

6.1500

Mount Type

UNIVERSAL RAIL MOUNT

Product Type

Laser/Light

Reviews

There are no reviews yet.

Be the first to review “Streamlight TLR-6 White LED & Red Laser for Kimber Micro (69276)”