Description
If you run an ultrasonic case cleaner and you're tired of scrubbing gunk out of the tight spots on your firearm parts, this RCBS concentrate does the grunt work for you. It's a synthetic detergent that gets down into slide rails, bolt carriers, trigger groups, and all the little crevices a brush can't reach. Drop your parts in, run the cycle, and the sound waves plus solution do the cleaning while you handle something else. It's non-corrosive and non-combustible, so there's no harsh chemical smell filling up your workshop, and the low-foaming formula keeps your tank running the way it should.
What Makes the RCBS Ultrasonic Weapons Cleaner Worth Keeping on the Shelf
The big draw here is the rust preventive baked right into the formula. A lot of cleaners strip a part down to bare metal and leave it vulnerable, but this one leaves behind a layer of corrosion protection as it works. That matters if you're cleaning steel components that would otherwise flash rust the second they hit the air. It pulls carbon buildup, grease, and fouling off both the inside and outside surfaces, which is exactly what you want when you break a gun all the way down for a deep clean.
Getting the Most Out of Your Ultrasonic Weapons Solution
This is a concentrate, so a little goes a long way once you mix it with water in your tank. It's designed around the RCBS Ultrasonic Case Cleaner, though it plays fine with other ultrasonic units too. Made in the USA, it's a solid pick for anyone who already owns an ultrasonic setup and wants a dedicated firearm-parts solution instead of running a general degreaser that isn't built for the job.
Bottom line, it's a no-fuss way to clean parts thoroughly and protect them at the same time. If deep cleaning is part of your regular routine, this earns its spot next to the tank.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 87059
- UPC: 076683870599
- Product Type: Ultrasonic Cleaning Solution
- Size: 32 oz (1 Quart)
- Formula: Synthetic Concentrate with Rust Preventive
- Characteristics: Non-Corrosive, Non-Combustible, Low-Foaming
- Suitable For: Firearm Parts
- Designed For Use With: RCBS Ultrasonic Case Cleaner
- Country of Origin: Made in USA
- Quantity: 1 Bottle
- Weight: 2.6 lbs
What’s Included
- One 32 oz bottle of RCBS Ultrasonic Weapons Cleaning Solution concentrate
Frequently Asked Questions
Do I have to use this with an RCBS ultrasonic cleaner?
It's designed specifically for the RCBS Ultrasonic Case Cleaner, but it works in other ultrasonic units as well. As long as you've got an ultrasonic tank, you can mix and run this solution. The formula is what matters, not the brand of machine.
Will this cleaning solution damage my firearm finishes?
The synthetic detergent is non-corrosive, so it's formulated to clean parts without harming them during a normal cycle. It's built for firearm components, both inside and out. As with any cleaner, avoid running delicate or coated parts far longer than needed.
Does the RCBS Ultrasonic Weapons Cleaning Solution prevent rust?
Yes, that's one of its standout features. The formula includes a rust preventive that leaves behind corrosion protection as it cleans, so your steel parts aren't left bare and exposed. It's a nice touch for anyone cleaning components that would otherwise flash rust.
Is this a concentrate or ready to use?
It's a concentrate, so you'll dilute it with water in your ultrasonic tank rather than pouring it in straight. A little goes a long way, which stretches the bottle across a lot of cleaning sessions. Follow the mixing directions on the label for best results.




Reviews
There are no reviews yet.