Description
The pins holding your Glock together are one of the last places people think to upgrade, which is exactly why doing it makes such a difference. The Cross Armory CRGPSRD 3 Pin Set replaces the three factory frame pins on your Gen 1-3 Glock with a matched set finished in a clean red that shows off through the frame cutouts. It's a small change that pulls a whole build together, especially if you're already running color-matched controls or a slide plate.
These aren't cast pins that showed up cheap. The set is precision machined from 4140 ordnance steel, then surface treated for a better finish and added corrosion resistance. The dimpled ends give your punch something to bite into, which keeps the tool from slipping and chewing up your frame during install. That geometry also makes reassembly a little quicker and cleaner, and the pins seat flush the way they should.
Where the CRGPSRD Pin Set Fits
This kit covers a wide slice of the Gen 1-3 lineup, including the Glock 17, 19, 20, 21, 22, 23, 24, 26, 27, 29, 30, 31, 32, 33, 34, 35, 38, and 39. The one thing to know up front is that it will not fit the slimline 42, 43, or 43x models. Everything is sized to the standard frame footprint, so it drops in without any filing or fitment work.
Getting the Cross Armory Pins Installed
If you've ever detail stripped a Glock, you already know the drill. Clear the firearm, pull the slide, and use a 3/32 punch over a bench block to push out the locking block pin, trigger pin, and trigger housing pin. Match each factory pin to its replacement and reinstall in the correct order, top pin first and trigger pin last so the slide stop lever seats right. The whole job takes a few minutes and needs nothing more than a punch and a little patience. No permanent changes, no holster clearance issues, just a sharper looking frame that runs exactly like it did before.
Key Specifications
- Manufacturer: Cross Armory
- Manufacturer Part Number: CRGPSRD
- Model: 3 Pin Set
- UPC: 037182204537
- Finish Color: Red
- Material: 4140 Ordnance Steel
- Manufacturing Method: Precision Machined (not cast)
- Pin Style: Dimpled ends
- Pins Included: 3 (locking block, trigger, trigger housing)
- Compatibility: Glock Gen 1-3: 17/19/20/21/22/23/24/26/27/29/30/31/32/33/34/35/38/39
- Not Compatible With: Glock 42 / 43 / 43x
- Holster Fit: Retains factory holster compatibility
- Surface Treatment: Treated for finish and corrosion resistance
What’s Included
- 3 machined replacement pins (locking block pin, trigger pin, trigger housing pin)
Frequently Asked Questions
Will this Cross Armory 3 Pin Set fit my Glock?
It fits the Gen 1-3 Glock 17, 19, 20, 21, 22, 23, 24, 26, 27, 29, 30, 31, 32, 33, 34, 35, 38, and 39. It does not fit the slimline 42, 43, or 43x. If you have one of the covered models, the set drops in with no fitting required.
What tools do I need to install the CRGPSRD pin set?
A 3/32 punch and a bench block are really all you need, though a small hammer helps if the factory pins are tight. Clear the firearm, remove the slide, then push out and swap each pin one at a time. Reinstall the top pins first and the trigger pin last so the slide stop lever seats correctly.
Do these red pins affect how the Glock functions or fits in a holster?
No. These are a direct replacement for the factory frame pins, so your Glock runs exactly like it did before. They also sit flush and don't add any bulk, so your existing holster fit stays the same.
Are the pins actually machined steel or just coated for looks?
They're precision machined from 4140 ordnance steel rather than cast, then surface treated for the finish and corrosion resistance. The red is part of the treatment, not a fragile paint coat. Owners report they stay put and hold up well after thousands of rounds.




Reviews
There are no reviews yet.