Description
Anyone who has spent a long day in the duck blind or busting clays knows the barrel gets grimy fast, and hauling out a full rod kit isn't always practical. The Allen Bore-Nado is a single-piece pull-through rope built for 12-gauge barrels that gets the job done in one motion. Add a little of your favorite bore solvent to the rope, drop the weighted end through the breach, and pull it out the muzzle to sweep away plastic wad residue, powder fouling, and grit.
How the Bore-Nado Cleaning Rope Works
The small end carries a weighted brass bore guide, which is the trick to feeding the rope cleanly through your barrel every time. As you pull, the vortex bristle section goes to work. Copper brushes woven into the rope agitate and lift fouling off the bore walls, then the built-in braided swab follows right behind to wipe everything out. It's a three-stage clean in a single stroke, and you just repeat the pass until the bore comes out clean.
Why the Bore-Nado Earns a Spot in Your Range Bag
At 8.5 inches packed down and barely over a couple ounces, this thing disappears into a range bag, blind bag, or gun case pocket. It's the kind of tool you reach for when you want a fast wipe-down after a shoot without breaking out the whole bench setup. Plenty of clay and waterfowl folks lean on a pull-through rope for exactly this reason. Like any bore rope, it works best when you keep it clean, so toss it in the wash once it gets caked up and let it dry fully before storing.
Think of the Bore-Nado as your quick-clean workhorse. It handles the between-hunt maintenance beautifully, and it still plays nicely alongside a deeper rod-and-brush cleaning when your shotgun needs the full treatment.
Key Specifications
- Manufacturer: Allen (Bore-Nado)
- Manufacturer Part Number: 70585
- UPC: 026509019268
- Gauge: 12 Gauge
- Product Type: Bore Cleaning Rope
- Color: Gray/Red
- Material: Polyester
- Length: 8.50 in (packed)
- Bore Guide: Weighted brass
- Bristles: Copper vortex brushes
- Swab: Built-in braided swab
- Quantity: 1
- Shipping Weight: 0.175 lb
What’s Included
- 1 Allen Bore-Nado 12 Gauge Bore Cleaning Rope
Frequently Asked Questions
How do I use the Bore-Nado cleaning rope on my 12-gauge?
Add a bit of bore solvent to the rope, then drop the weighted brass end through the breach end of the barrel and pull it out the muzzle in one steady stroke. The copper vortex bristles scrub the fouling loose and the braided swab wipes it away as it passes through. Repeat the pass until the bore comes out clean.
Is the Allen Bore-Nado reusable and washable?
Yes, it's built to be used again and again. When it gets caked with fouling and residue, toss it in the wash to freshen it up, ideally in a mesh laundry bag, and let it dry completely before you store it. A clean rope cleans better, since a dirty one can just smear old grime back into your bore.
Does the Bore-Nado replace a full cleaning kit?
It's best thought of as a fast, convenient cleanup tool rather than a total replacement. It's ideal for quick maintenance after a day of shooting or hunting when you don't want to break out the rod and brushes. For heavy fouling, rust, or a deep periodic cleaning, you'll still want a full rod-and-brush setup, and the Bore-Nado works great as the finishing step.
Will this fit any 12-gauge shotgun?
This model is sized specifically for 12-gauge bores, so it works across pumps, semi-autos, and break actions chambered in 12 gauge. If you shoot other gauges like 20 gauge, Allen makes matching Bore-Nado ropes in those sizes. Always match the rope to your gauge so it feeds smoothly and scrubs the way it should.




Reviews
There are no reviews yet.