0
0

Otis Ripcord 36″ Bore Cleaner .260/.264/6.5mm Pull-Through

UPC: 014895004791

$12.99

12 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

A dirty bore does not always mean a full teardown at the bench. The Otis Ripcord is built for the times you want your .260, .264, or 6.5mm barrel clean in a hurry, whether you are between strings at the range or sitting in the field after a long day. Feed it breech-to-muzzle and pull it through in one pass, and you have knocked out most of the fouling before your next reload.

What Makes the Ripcord 6.5mm Work

The heart of this thing is a rigid, helix-shaped rubber core molded specifically for 6.5mm bores. That shape keeps the cleaning surface pressed out against the rifling for full 360-degree contact, so you are actually scrubbing the grooves instead of just wiping the high spots. Wrapped around that core is roughly 10 inches of braided Nomex, which pulls double duty as both a brush that loosens carbon and copper and a patch that traps the loosened junk on the way out.

Clean a Hot Barrel Without Waiting

One of the best parts about the Ripcord is that the Nomex surface shrugs off heat up to 700 degrees. That means you do not have to sit around waiting for the barrel to cool before you run it. Pull it through while things are still warm at the range and get back to shooting.

Built to Grow With Your Otis Gear

The Ripcord runs 36 inches overall and packs down small enough to disappear into a range bag, truck kit, or pack. It comes with 8-32 threaded ends on both sides, so it plays nice with the rest of the Otis cleaning lineup. Want a deeper clean? Thread on a compatible bore brush and run it through for extra bite. Made in the USA and backed by the Otis No Nonsense lifetime warranty, it is the kind of tool you buy once and forget you ever cleaned any other way.

Key Specifications

  • Manufacturer: Otis Technology
  • Manufacturer Part Number: FG-RC-264
  • Model: Ripcord
  • UPC: 014895004791
  • Caliber: .260 Cal / .264 Cal / 6.5mm
  • Overall Length: 36"
  • Cleaning Surface: Approx. 10" braided Nomex
  • Core: Caliber-specific molded rubber, helix-shaped
  • Heat Resistance: Up to 700 degrees F
  • Thread Pattern: 8-32 threaded ends
  • Direction of Use: Breech-to-Muzzle
  • Country of Origin: Made in USA
  • Warranty: No Nonsense Lifetime Warranty

What’s Included

  • Otis Ripcord 36" pull-through bore cleaner (.260/.264/6.5mm)

Frequently Asked Questions

What calibers does the Otis Ripcord 264 clean?

This Ripcord is built specifically for .260 caliber, .264 caliber, and 6.5mm rifle bores. The rubber core is molded to that bore diameter, so it presses the cleaning surface right into the rifling for proper contact. If you shoot something like a 6.5 Creedmoor, 6.5 PRC, .260 Remington, or 6.5×55, this is the one you want.

Can I use the Ripcord on a hot barrel?

Yes. The braided Nomex surface is rated to handle heat up to 700 degrees, so you can run it through a warm barrel without waiting for it to cool. That is a big reason folks keep one in their range bag for quick cleanups between strings.

Does the Otis Ripcord work with a bore brush or other Otis parts?

It does. Both ends of the Ripcord have 8-32 threads, which match the rest of the Otis cleaning system. You can attach a compatible bore brush for a more aggressive clean or swap in other 8-32 Otis components as needed.

How do you use the Ripcord bore cleaner?

You run it breech-to-muzzle in one pass, so there is no gravity feed or cleaning rod required. Drop the weighted end in from the breech, pull it through the muzzle, and the helix core plus Nomex loosens and captures fouling as it goes. It is quick enough to knock out a bore in under a minute.

Additional information

UPC

014895004791

Manufacturer

Manufacturer Part Number

FGRC264

Length

36"

Thread Pattern

5-40"

Reviews

There are no reviews yet.

Be the first to review “Otis Ripcord 36″ Bore Cleaner .260/.264/6.5mm Pull-Through”