$1,091.99
7 in stock
Online inventory may differ from in-store availability.
NOTICE: This item is subject to shipping times of 10-12 days due to brand shipping logistics.
Orders are processed quickly so your item gets moving as soon as possible.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
FN built the 509 CC Edge around one core idea: give you every performance advantage you'd normally have to pay a gunsmith for, straight from the factory. The result is a compact 9mm that handles like a full-size competition pistol without ballooning in size.
The centerpiece of the whole package is FN's auto-indexing compensator. It's not threaded on like most aftermarket setups; instead it locks onto proprietary lugs machined into the 4.2-inch barrel and releases with a 90-degree twist. No tools, no shims, no clocking headaches. The comp's dual-port, v-style venting pushes gas and muzzle flash up and out of your sight picture, cutting muzzle rise by 25 percent. In actual use, this pistol shoots noticeably flatter than anything else in its size class.
The barrel itself is cold hammer-forged stainless steel with a recessed target crown and a gold Titanium Nitride PVD finish. That TiN coating isn't just for looks. It adds hardness, lubricity, and long-term wear resistance, and the polished chamber and feed ramp keep cycling smooth and reliable. The lightening-cut graphite PVD slide reduces reciprocating mass and gives you a better grip surface for racking, while showing off that gold barrel through the cuts.
FN's patented Low-Profile Optics Mounting System is one of the best factory red dot setups on any pistol right now. The optic mounts directly into the slide using a short front plate and optic-specific recoil pins, sitting the dot low enough that the co-witness fiber optic front sight still functions naturally with most popular micro red dots. No gunsmith needed, no Loctite required. The flat-faced trigger breaks cleanly at approximately 5.6 pounds with a smooth take-up and short reset, and the ambidextrous slide stop plus reversible mag release mean both left- and right-handed users get a complete package.
This variant ships with three 10-round magazines featuring weighted aluminum base pads for faster drops, two interchangeable backstraps, four MRD mounting plates, a ballistic case, and a locking device. It's a complete ready-to-run setup for anyone who wants a premium carry gun without the hassle of piecing one together.
No, and that's one of the things that genuinely sets this pistol apart from other compensated handguns. The comp locks onto proprietary lugs machined into the barrel and releases with a simple 90-degree twist. Push in, twist, done. The lugs also auto-index the comp back into perfect alignment when you reinstall it, so there's no shimming or clocking involved.
Yes. FN's patented Low-Profile Optics Mounting System is built directly into the slide and supports over 10 different micro red dot footprints using the included mounting plates. Each plate has optic-specific recoil pins and sits on an O-ring that keeps screws from backing out under recoil. No milling, no Loctite, just mount and zero.
Yes. The 509 CC Edge wears suppressor-height sights specifically so they co-witness through most popular micro red dots once an optic is mounted. The green fiber optic front sight is bright and easy to pick up in daylight, and the blacked-out rear minimizes glare. If your dot ever goes down, the irons are still there and still usable.
The barrel's Titanium Nitride PVD finish is more than cosmetic. TiN is an extremely hard ceramic coating that improves surface lubricity, resists corrosion, and extends the service life of the barrel. The polished chamber and feed ramp also contribute to reliable cycling round after round. You'll see it through the lightening cuts in the slide, which is a nice bonus.
The overall length comes in at 7.5 inches, which is comparable to a Glock 19 with a standard barrel. The compact grip frame makes it concealable, and the compensator adds length up front but not height or width. The big practical benefit for carry is that the comp genuinely reduces muzzle flip, which means faster, more controlled follow-up shots from a smaller package.
Pretty much fully. The slide stop is ambidextrous, and the magazine release is single-sided but reversible for left-hand operation. The grip texturing and interchangeable backstraps work regardless of which hand is dominant. It's one of the more southpaw-friendly options in the compact carry category.
| UPC | 845737015428 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 66-101350 |
| Action | |
| ATF Type | Pistol |
| Barrel Length | 4.2" |
| Caliber/Gauge | 9mm |
| Capacity | 10 + 1 |
| Length | 7.5 |
| Number of Magazines | 3 10 rd. |
| Package Height | 3.4 |
| Package Width | 11.0 |
| Product Type | Semi-Auto Pistol |
| Safety | No |
| Shipping Weight | 4.05 |
| Sights | Co-Witnessing Height Fiber Optic Front |
| Sights Type | Co-Witnessing Height Fiber Optic Front |
| Slide Description | Lightening Cut/Optic Cut/Serrated |
You must be logged in to post a review.
Reviews
There are no reviews yet.