Description
Browning took a rifle that already had a strong reputation and gave it a real refresh with the X-Bolt 2, and this Hunter Composite in .308 Winchester is one of the most practical ways to get into the platform. The receiver got reworked with extra bolt guidance surface, so cycling feels smoother and more sure-handed than the original, and the spiral-fluted bolt with its reshaped handle and knob runs fast with the short 60 degree lift that keeps your knuckles clear of a big scope. This particular version wears a Tungsten Cerakote finish on the receiver paired with a matte blued 22-inch sporter contour barrel, giving it a sharp two-tone look with added weather protection where it counts.
The Vari-Tech Stock Sets This X-Bolt 2 Apart
The headline feature here is the Vari-Tech composite stock. Length of pull adjusts to fit your frame, the comb raises to line your eye up behind an optic, and the grip module swaps between the installed sporter angle and the included vertical grip. That kind of fit adjustment used to mean a trip to a stocksmith or a pricier chassis rifle. Rubber overmolded grip panels keep things planted when the weather turns wet, and the Inflex recoil pad takes the sting out of a long sight-in session.
A .308 Hunter Built Around Accuracy
The action is bedded and the barrel free floats for consistency shot to shot, and the muzzle comes threaded with a radial brake installed plus a thread protector for when you'd rather run it clean. Browning's DLX trigger is a three-lever design that breaks clean with no creep or overtravel, set at 3.5 pounds from the factory and adjustable down to 3. Feeding comes from a detachable 4-round rotary magazine, and the receiver is drilled and tapped for Browning's X-Lock mounts, which use four screws per base for a rock-solid optic setup. At around 6.5 pounds bare, this is a rifle you can carry all day in deer country and trust when the moment finally comes.
Key Specifications
- Manufacturer Part Number: 036079218
- UPC: 023614865056
- Caliber: .308 Winchester / 7.62 NATO
- Action: Bolt Action, 60 degree bolt lift
- Barrel Length: 22 in, sporter contour, free floated
- Barrel Finish: Matte blued
- Receiver Finish: Tungsten Cerakote (two-tone)
- Muzzle: Threaded M13x0.75 with radial muzzle brake
- Capacity: 4+1, detachable rotary magazine
- Trigger: DLX adjustable, 3.5 lb factory set (adjustable to 3.0 lb)
- Stock: Black Vari-Tech composite, adjustable LOP and comb
- Overall Length: 42.75 in
- Weight: 6 lbs 8 oz
- Safety: Top-tang with bolt unlock button
- Sights: None, drilled and tapped for X-Lock scope mounts
What’s Included
- Browning X-Bolt 2 Hunter Composite rifle
- One 4-round detachable rotary magazine
- Radial muzzle brake (installed)
- Thread protector cap
- Vertical grip module (sporter grip installed)
- Owner's manual
Frequently Asked Questions
Does the Browning X-Bolt 2 Hunter Composite come with iron sights or a scope?
No, it ships without sights, which is standard for a hunting rifle in this class. The receiver is drilled and tapped for Browning's X-Lock scope mounting system, which uses four screws per base instead of the usual two for a very secure optic setup. Plan on adding rings, bases, and a scope before heading to the range.
What can I adjust on the Vari-Tech stock?
Three things: length of pull, comb height, and grip angle. The comb adjustment is especially handy for getting your eye lined up behind a scope with larger objective bells, and the grip swaps between the installed sporter module and an included vertical module. It's a level of fit customization you rarely see on a composite hunting rifle at this weight.
Is the barrel on this X-Bolt 2 threaded for a suppressor or brake?
Yes, the 22-inch sporter barrel is threaded M13x0.75 and comes with a radial muzzle brake already installed, plus a thread protector cap if you want to run the muzzle bare. You can also swap on Browning's Recoil Hawg brake or a compatible suppressor. The .308 chambering pairs nicely with a can for a quieter deer setup.
How is the X-Bolt 2 different from the original X-Bolt?
Browning redesigned the receiver with additional bolt guidance surface, so the action cycles noticeably smoother, and the bolt got spiral fluting plus a reshaped handle and knob. The biggest changes are the new DLX three-lever trigger, which breaks with zero creep and adjusts from 3.5 down to 3 pounds, and the adjustable Vari-Tech stock. The proven fundamentals like the rotary magazine, tang safety, and 60 degree bolt lift carry over.



Reviews
There are no reviews yet.