0
0

Daniel Defense M4A1 5.56 NATO 14.5in FDE RIS II Rifle 10+1

UPC: 815604016605

$2,535.00

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

There are AR-15s that look the part, and then there are rifles like the Daniel Defense M4A1. This is the civilian version of the Block II carbine setup that special operations units have carried since the mid 2000s, right down to the RIS II quad rail that Daniel Defense originally built for SOCOM's SOPMOD program. The Flat Dark Earth rail over black furniture gives it that unmistakable deployment-photo look, and everything underneath is the real deal, not a costume.

What Makes the M4A1 Worth It

The heart of the rifle is a 14.5 inch cold hammer forged barrel in chrome moly vanadium steel, chrome lined, with a 1:7 twist that stabilizes everything from 55 grain plinking loads up through heavier 77 grain match ammo. Daniel Defense pins and welds their extended flash suppressor to bring overall length to 16 inches, so you get the handling of a shorter barrel in a standard rifle configuration. Gas is carbine length through a low profile gas block tucked under the free floated RIS II, which means barrel harmonics stay consistent no matter how much gear you hang on the rail. The bolt carrier group is an M16 profile unit, MP tested and chrome lined with a properly staked gas key, and both receivers are CNC machined from 7075-T6 aluminum with Type III hard coat anodizing.

Living With the Daniel Defense M4A1

Day to day, the details are what you notice. The GRIP-N-RIP charging handle works from either side, the flared magwell speeds up reloads, and the SoftTouch overmolded buttstock and grip are far more comfortable than standard mil-spec furniture. The flat top receiver and full length top rail are ready for whatever optic you prefer, and the quad rail takes any Picatinny light, laser, or grip without adapters. This version ships with a single 10 round PMag. It runs about 6.74 pounds bare, made in the USA, and backed by Daniel Defense's 100 percent satisfaction guarantee.

Key Specifications

  • Model: M4A1
  • MPN: 02-088-06027-055
  • UPC: 815604016605
  • Caliber: .223 Rem / 5.56 NATO
  • Action: Semi-Auto, Direct Impingement
  • Capacity: 10+1
  • Barrel: 14.5" Cold Hammer Forged, Chrome Lined CMV, M4 Profile
  • Twist Rate: 1:7
  • Muzzle Device: Pinned & Welded DD Flash Suppressor (16" OAL)
  • Gas System: Carbine Length, Low Profile Gas Block
  • Handguard: RIS II Quad Rail, Flat Dark Earth, 6061-T6 Aluminum
  • Receivers: CNC Machined 7075-T6 Aluminum, Type III Hard Coat Anodized
  • Stock: Daniel Defense 6-Position with SoftTouch Overmolding
  • Sights: Optic Ready
  • Weight: 6.74 lbs
  • Thread Pattern: 1/2"x28

What’s Included

  • Daniel Defense M4A1 rifle
  • One 10-round Magpul PMag
  • Full-latch impact plastic hard case
  • Owner's manual

Frequently Asked Questions

Is the flash suppressor on the Daniel Defense M4A1 removable?

No, it's permanently pinned and welded to the 14.5 inch barrel to bring the overall barrel length to 16 inches. That means you can't swap it for a different muzzle device or direct-thread suppressor mount. The upside is you get shorter-barrel handling in a standard rifle package.

Does the M4A1 come with sights or an optic?

It ships optic ready with no sights installed. The flat top upper and full length RIS II top rail give you plenty of real estate for a red dot, LPVO, or a set of backup iron sights. Most folks pair it with an optic and offset irons since the rail supports just about any mounting setup.

What gas system does the Daniel Defense M4A1 use?

It runs a carbine length direct impingement system with a low profile gas block pinned in place under the free floated RIS II rail. That matches the original military M4A1 configuration and the carbine length is what allows the gas block to fit properly inside the rail housing. It's a proven, reliable setup with a long track record.

How is the RIS II rail different from newer M-LOK handguards?

The RIS II is the actual quad rail Daniel Defense built for SOCOM's SOPMOD Block II program back in 2005, with Picatinny slots on all four sides. Any rail-mounted light, laser, or grip attaches directly without adapters, which is handy if your accessories are Picatinny based. It's a bit heavier than M-LOK designs, but it's also the correct choice if you want that authentic Block II configuration.

Additional information

UPC

815604016605

Manufacturer

Manufacturer Part Number

02-088-06027-055

Action

ATF Type

RIFLE

Barrel Finish

Black Phosphate

Barrel Length

14.5"

Caliber/Gauge

.223 REM/5.56 NATO

Capacity

10 + 1

Color

Flat Dark Earth

Length

34.75

Model

Number of Magazines

1 10 rd. PMag

Package Height

4.0

Package Width

10.9

Product Type

Rifle

Safety

Manual Thumb

Shipping Weight

12.85

Sights

No Sights

Thread Pattern

1/2"x28

Reviews

There are no reviews yet.

Be the first to review “Daniel Defense M4A1 5.56 NATO 14.5in FDE RIS II Rifle 10+1”