0
0

Daniel Defense MK18 URG 5.56 10.3″ RIS II FDE Complete Upper

UPC: 852548002592

$1,527.00

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is about as close as you can get to running the real deal at home. The Daniel Defense MK18 URG uses the same 10.3" cold hammer forged barrel and the RIS II railed forend that Daniel Defense supplies to USSOCOM, so you are getting service-grade hardware rather than a lookalike. That short barrel is the exact length long favored for close-quarters work, which is why the MK18 platform earned its reputation for being fast, handy, and tough in tight spaces.

What Makes the MK18 URG Tick

The barrel is Chrome Moly Vanadium steel with a 1:7 twist, chrome lining, and a mil-spec heavy phosphate coating, and every barrel gets HP and MPI tested before it leaves the shop. The 1:7 rate stabilizes heavier match and defensive loads nicely while still handling lighter target ammo, so you are not boxed into one type of round. Up front sits a Daniel Defense flash suppressor in nitride-finished 17-4 stainless, feeding off a pinned low profile gas block and a carbine-length direct impingement system.

Rail and Receiver on the MK18 Upper

The RIS II MK18 handguard runs roughly 9.5 inches of quad Picatinny with the Bolt-Up System that SOCOM put through the wringer before fielding. It gives you a continuous top rail across the A4 flat-top receiver for whatever optic, backup irons, or night vision setup you want to run, plus real estate on the sides and bottom for lights and lasers. The upper itself is CNC machined 7075-T6 aluminum with M4 feed ramps, indexing marks, and Type III hard coat anodizing under that Flat Dark Earth finish. Santoprene rail panels come along to cover the sections you are not using.

Getting the MK18 URG Running

This is a complete group that shows up ready to work. The M16-profile bolt carrier is MP tested, chrome lined, and comes with a properly staked gas key, and the ambidextrous GRIP-N-RIP charging handle is built for suppressed fire with anti-gas features that push gas up and away from your face. Pair it with a compatible lower, drop in your buffer setup, and you are good to head to the range. It is a proven build from a name that owns its own barrel-making, and that pedigree shows the first time you run it hard.

Key Specifications

  • Manufacturer: Daniel Defense
  • Model: MK18 URG
  • Manufacturer Part Number: 23-004-08013-011
  • UPC: 852548002592
  • Caliber: .223 Rem / 5.56 NATO
  • Barrel Length: 10.3"
  • Barrel Twist: 1:7
  • Barrel Profile: Government
  • Barrel Material: Cold Hammer Forged Chrome Moly Vanadium, Chrome Lined
  • Gas System: Carbine Length, Pinned Low Profile Gas Block, Direct Impingement
  • Muzzle Device: Daniel Defense Flash Suppressor, 17-4 PH Stainless, Nitride
  • Handguard: RIS II MK18 Quad Rail, approx. 9.5", 6061-T6 Aluminum
  • Upper Receiver: 7075-T6 Aluminum, A4 Flat Top, M4 Feed Ramps, Type III Hard Coat Anodized
  • Bolt Carrier Group: M16 Profile, MP Tested, Chrome Lined, Staked Gas Key
  • Charging Handle: Ambidextrous GRIP-N-RIP
  • Color: Flat Dark Earth

What’s Included

  • Complete MK18 URG upper receiver
  • 10.3" cold hammer forged barrel with pinned low profile gas block
  • Daniel Defense flash suppressor
  • RIS II MK18 quad rail handguard
  • M16-profile bolt carrier group
  • Ambidextrous GRIP-N-RIP charging handle
  • Daniel Defense Santoprene rail panels

Frequently Asked Questions

Is the Daniel Defense MK18 URG a complete upper or do I need to add parts?

It ships as a complete upper receiver group, so the barrel, RIS II rail, flash suppressor, M16 bolt carrier group, and GRIP-N-RIP charging handle are all installed. You just need a compatible lower along with your buffer, buffer tube, and spring to build a working firearm. There is no forward assist or dust cover assembly to buy separately since it comes ready to run.

What kind of rail does the MK18 upper use and will my accessories fit?

It uses the RIS II MK18 quad Picatinny rail, roughly 9.5 inches long, the same railed forend Daniel Defense supplies to USSOCOM. That means standard Picatinny lights, lasers, foregrips, and offset sights bolt right on, and the continuous top rail lets you run an optic with backup irons. Santoprene panels are included to cover the sections you leave open.

Does the 10.3" barrel work well with a suppressor?

Yes, the MK18 URG is a favorite for suppressed setups. The ambi GRIP-N-RIP charging handle was specifically designed for suppressed fire with anti-gas features that redirect gas up and away from your face, which cuts down on the extra gas blowback a can tends to add on a short barrel. The Daniel Defense flash suppressor also uses a common thread pattern that plays nice with a lot of muzzle-mount suppressors.

What twist rate is the barrel and what ammo does it like?

The barrel has a 1:7 twist, which is the mil-spec standard for 5.56. That rate stabilizes heavier bullets in the 62 to 77 grain range while still shooting lighter 55 grain loads just fine, so you have flexibility across defensive, match, and plinking ammo. The chrome-lined bore also holds up well to sustained fire and makes cleanup easier.

Additional information

UPC

852548002592

Manufacturer

Manufacturer Part Number

2300408013011

Action

Barrel Finish

Black Phosphate

Barrel Length

10.3"

Caliber/Gauge

.223 REM/5.56 NATO

Color

Black

Length

10.3

Model

Package Height

4.0

Package Width

5.5

Product Type

Complete

Shipping Weight

4.65

Sights

Flat Top

Style

Complete

Reviews

There are no reviews yet.

Be the first to review “Daniel Defense MK18 URG 5.56 10.3″ RIS II FDE Complete Upper”