Description
The Xeno 3-Prong from Dead Air is one of those muzzle devices that earns its spot two ways. Run it bare and you get solid flash reduction from a compact three prong design. Add a Xeno Adapter equipped suppressor and it becomes a fast, taper style quick detach mount with the kind of return to zero that precision guys care about. This is the DA130 version with 5/8-24 threads and a 9mm through bore, which covers .30 caliber rifles like your 300 Blackout and .308 builds along with 5/8-24 threaded 9mm hosts.
Why the Xeno 3-Prong Doesn't Ring
Anybody who has run a tuning fork style prong device knows the annoying ping they can make when fired or bumped against a barricade. Dead Air detuned the prongs on the Xeno, same as their full size 3-prong line, so there is no resonance or lingering hum. It just does its job quietly. At 1.965 inches long and 3.2 ounces, it also adds very little to the end of your barrel, and the shortened profile plays nice with suppressors that have smaller blast chambers.
Built From Nitrided 4140 Steel
Dead Air machines this mount from heat treated 4140 alloy steel and gives it a black nitride finish, which buys you hardness, corrosion resistance, and easier cleanup when carbon and copper start caking on. The forward geometry is shaped so fouling will not weld your can in place, meaning the suppressor and adapter come off without a fight even after long stretches between removals. The flash hider and adapter also mate with left hand threads, so the adapter stays put in your suppressor when you break things down instead of unthreading at the worst possible time.
Setting Up the Xeno Mount System
Keep in mind this is the muzzle side of the equation. The Xeno Adapter that threads into your suppressor is sold separately, so grab one of those if you plan to use this as a QD mount. If you are just after a compact, no nonsense flash hider that leaves the door open for a suppressor later, the Xeno 3-Prong is a smart way to set up your rifle once and be done with it.
Key Specifications
- Manufacturer: Dead Air Silencers
- Manufacturer Part Number: DA130
- UPC: 810128160711
- Model: Xeno 3-Prong
- Product Type: Flash Hider / Suppressor Mount
- Thread Pattern: 5/8"x24
- Through Bore: 9mm
- Material: 4140 HT Alloy Steel
- Finish: Black Nitride
- Overall Length: 1.965 in
- Weight: 3.20 oz
- Color: Black
- Mount Compatibility: Dead Air Xeno Adapter
What’s Included
- Xeno 3-Prong Flash Hider (Xeno Adapter sold separately)
Frequently Asked Questions
Do I need anything else to mount a suppressor to the Xeno 3-Prong Flash Hider?
Yes, you will need the Dead Air Xeno Adapter, which is sold separately and threads into your suppressor. The adapter and flash hider mate together over a large taper with left hand threads for a secure, repeatable lockup. Without the adapter, the Xeno still works great as a standalone flash hider.
Will the prongs ring or ping when I fire?
No. Dead Air detuned the prongs on the Xeno series specifically to eliminate the tuning fork resonance that plagues a lot of prong style devices. It stays quiet whether you are firing or knocking it against a barricade.
What calibers will the 5/8-24 Xeno 3-Prong work with?
This DA130 version has a 9mm through bore, so it handles .30 caliber rifles like 300 Blackout and .308 as well as 9mm hosts with 5/8-24 muzzle threads. Just confirm your barrel is threaded 5/8-24 before ordering. Dead Air also makes a 1/2-28 version, the DA129, for 5.56 platforms.
Will carbon buildup make the suppressor hard to remove?
Dead Air shaped the forward elements of the flash hider so carbon fouling will not lock the adapter and suppressor in place, even after hundreds of rounds between removals. The nitrided 4140 steel also makes scrubbing off carbon and copper deposits easier without chewing up the threads.





Reviews
There are no reviews yet.