Description
Mountain hunting has a way of making you regret every extra ounce, and that is exactly the problem the Mark V Backcountry 2.0 was built to solve. Weatherby took their legendary Mark V action, trimmed weight everywhere they could, and dropped it into the Peak 44 Blacktooth carbon fiber stock, one of the lightest production stocks out there at around 19 ounces. The result is a rifle that hauls comfortably up a ridge but still delivers the flat-shooting punch of the .270 Weatherby Magnum, a cartridge that has been dropping elk and mule deer at distance since Roy Weatherby dreamed it up.
What Makes the Backcountry 2.0 Shootable
Magnum cartridges in featherweight rifles usually mean a rough day at the bench, but Weatherby addressed that from two directions. Up front, the Accubrake ST uses symmetrically spaced ports to bleed off recoil and muzzle rise, and it is blended to match the barrel profile so it does not look like an afterthought. Out back, the 3DHEX recoil pad is a 3D printed design with internal voids that collapse progressively under recoil, stretching the impulse out and softening the hit on your shoulder. Add the crisp TriggerTech trigger and the famously short 54 degree bolt throw of the Mark V action, and follow-up shots come fast and clean.
Backcountry 2.0 Barrel and Finish Details
The fluted 26 inch barrel measures 28 inches with the brake installed, wearing a #2 MOD contour and a 1:10 twist that stabilizes the full range of .270 caliber bullets. The barreled action is protected in Patriot Brown Cerakote with a graphite black bolt, and the stock shows exposed carbon fiber with green and brown sponge accents. Feeding comes from a 3+1 internal magazine, the receiver is drilled and tapped for optics, and Weatherby backs it with their sub-MOA accuracy guarantee. This is a serious tool for hunters who measure their seasons in miles.
Key Specifications
- Manufacturer: Weatherby
- Model: Mark V Backcountry 2.0
- MPN: MBC20N270WR8B
- UPC: 747115448524
- Caliber: .270 Weatherby Magnum
- Action: Bolt Action
- Capacity: 3+1
- Barrel Length: 26 in (28 in with Accubrake ST installed)
- Barrel: Fluted, #2 MOD contour, threaded
- Twist Rate: 1:10
- Stock: Peak 44 Blacktooth carbon fiber, green and brown sponge accents
- Finish: Patriot Brown Cerakote barrel/receiver, Graphite Black bolt
- Trigger: TriggerTech
- Overall Length: 48 in
- Length of Pull: 13.5 in
- Weight: Approx. 6.2 lbs
What’s Included
- Weatherby Mark V Backcountry 2.0 rifle
- Accubrake ST muzzle brake (factory installed)
- Owner's manual
Frequently Asked Questions
Is the barrel on the Mark V Backcountry 2.0 26 inches or 28 inches?
The barrel itself is 26 inches with a fluted #2 MOD contour. With the factory Accubrake ST muzzle brake installed, the total measurement comes to 28 inches, which is why you'll see both numbers listed. Overall rifle length is 48 inches.
How bad is the recoil on a .270 Weatherby Magnum this light?
It's far more manageable than you'd expect from a rifle in this weight class. The Accubrake ST does a lot of heavy lifting by venting gases through symmetrical ports, and the 3DHEX recoil pad uses collapsing internal voids to spread the recoil impulse over a longer period. Between the two, most hunters find it comfortable enough for a full range session.
Does the Backcountry 2.0 come with sights or a scope?
No, this rifle ships without sights or optics. The receiver comes drilled and tapped from the factory, so you just need bases or a rail plus rings for your scope of choice. Given the flat trajectory of the .270 Weatherby Magnum, a quality scope with some magnification is the way to go.
Does Weatherby guarantee accuracy on the Mark V Backcountry 2.0?
Yes, Weatherby backs the Mark V line with a sub-MOA accuracy guarantee when using Weatherby factory or premium ammunition. The crisp TriggerTech trigger and stiff carbon fiber stock help you get the most out of that potential. Owners regularly report tight groups with quality factory hunting loads.




Reviews
There are no reviews yet.