Description
There's a lot to like about a semi-auto that keeps things simple, and the Spandau S2 does exactly that. It runs on an inertia operating system, the same basic design that made Benelli famous, which means fewer moving parts, less gas fouling in the action, and reliable cycling across a range of loads. This version wears full Mossy Oak Bottomland camo across the stock, receiver, and 24-inch vent rib barrel, and the pattern flows cleanly from one part to the next. At just under 7 pounds, it carries lighter than most autoloaders in its class, which your shoulder will appreciate on a long walk into the timber.
Why the 24-Inch Spandau S2 Makes Sense in the Field
The shorter barrel is a smart pick for turkey hunters and anyone working tight cover, where a quick-swinging gun beats a long one every time. The 3-inch chamber handles everything from light field loads to heavier hunting shells, and the magazine holds three 2.75-inch shells. Up top you get a bright fiber optic front sight for fast target acquisition, and the receiver comes drilled and tapped so mounting a red dot for turkey season is a simple job. The barrel is threaded for the Benelli/Mobil choke pattern, one of the most common systems out there, and Spandau includes four chokes: Cylinder, Modified, Extended Ported Modified, and Full.
Thoughtful Touches on the S2 Bottomland
Spandau added the kind of upgrades people usually pay extra for. The oversized charging handle and controls are easy to run with cold fingers or gloves, and the enhanced loading gate with its open-cut design makes topping off the magazine quick and painless. A rubber recoil pad takes the edge off heavier loads, and the included drop and cast spacer kit lets you tune the stock fit to your build. The S2 is also compatible with Benelli M2 accessories, so the aftermarket is wide open. Backed by a 1-year warranty and a lifetime service plan, this is a working hunter's shotgun that punches above its weight.
Key Specifications
- Manufacturer Part Number: 21000191
- UPC: 810162050290
- Gauge: 12 Gauge
- Action: Semi-Auto, Inertia Operating System
- Barrel Length: 24" Vent Rib
- Chamber: 3"
- Capacity: 3 Rounds (2.75" Shells)
- Overall Length: 46.5"
- Weight: Approx. 6.9 lbs
- Stock: Fixed Synthetic, Mossy Oak Bottomland
- Sights: Fixed Fiber Optic Front
- Receiver: Drilled and Tapped for Optic Mount
- Choke System: Benelli/Mobil
- Chokes Included: Cylinder, Modified, Ext. Ported Modified, Full
- Accessory Compatibility: Benelli M2 Accessories
- Finish: Mossy Oak Bottomland Camouflage
What’s Included
- Spandau S2 12 Gauge Shotgun
- 4-Piece Choke Tube Kit (Cylinder, Modified, Extended Ported Modified, Full)
- Choke Tube Wrench
- Adjustable Drop/Cast Spacer Kit
- Owner's Manual
Frequently Asked Questions
Can I mount a red dot on the Spandau S2?
Yes, the receiver comes drilled and tapped from the factory using an M4 x .70 screw pattern, so adding an optic mount is straightforward. That's a nice touch for turkey hunters who want a red dot for precise head shots. Just match your mount's screw length to the receiver, as it varies by mount.
What choke tubes does the Spandau S2 use?
The barrel is threaded for the Benelli/Mobil choke pattern, which is one of the most widely supported systems on the market. The gun ships with four chokes: Cylinder, Modified, Extended Ported Modified, and Full, plus a wrench. Aftermarket turkey and waterfowl chokes in the Mobil pattern are easy to find from brands like Carlson's.
Will the S2 cycle light target loads reliably?
Inertia guns generally prefer a bit of authority behind the shell, and the S2 cycles standard field and hunting loads smoothly. Very light target loads can be hit or miss with any inertia action until the gun is broken in. For hunting loads, which is what this gun was built for, it runs clean with minimal maintenance since the action stays free of gas fouling.
Is the Spandau S2 compatible with Benelli parts and accessories?
Yes, the S2 is built to accept Benelli M2 accessories, which opens up a big aftermarket for stocks, magazine extensions, and other upgrades. It also includes a drop and cast spacer kit from the factory, so you can adjust stock fit without buying anything extra.




Reviews
There are no reviews yet.