$65.00
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
One of the smartest things Rugged did with their rifle suppressor lineup was make the front cap swappable, and this 5.56 cap is the reason why. Running a .223 or 5.56 rifle through a can with a 7.62 bore opening leaves performance on the table. Tighten that exit aperture down to match the bullet and you trap more gas inside the suppressor, which translates to additional decibel reduction and a smoother, deeper tone at the muzzle. It is a small part that makes a real difference you can hear on the first mag.
This cap is compatible with Rugged's rifle suppressor family, including the Radiant762, Surge762, Razor762, and Micro30. If you bought one of those cans in 7.62 so it could cover multiple rifles, this is the piece that lets it perform closer to a dedicated 5.56 suppressor when it is riding on your AR. Swap it back to the standard cap when you move the can over to a .30 caliber rifle and you have one suppressor pulling double duty without compromise.
Rugged does not cut corners on small parts. The FC001 is steel with a black high-temp finish that shrugs off the heat and carbon that build up at the front of a can. At right around 1.5 inches across it adds next to nothing in bulk or weight, and it installs and removes easily during normal cleaning and maintenance. Keep it in your range bag alongside your suppressor and swapping between calibers becomes a thirty second job.
If your Rugged can spends most of its life on a 5.56 platform, this cap should be on it. It is an inexpensive upgrade compared to buying a second suppressor, and the improvement in sound signature is the kind of thing you notice every time you pull the trigger. Grab one, match your bore to your bullet, and let the can do its best work.
It fits Rugged's rifle suppressor line, including the Radiant762, Surge762, Razor762, and Micro30. Rugged designed these cans with interchangeable front caps, so this one drops right in place of the standard cap. It is not made for pistol cans like the Obsidian series, which use their own cap sizes.
A smaller exit aperture matched to the bullet keeps more gas working inside the suppressor instead of escaping around the projectile. The result is additional decibel reduction and an improved tone when shooting 5.56 or .223. You will not turn a 7.62 can into a purpose-built 5.56 suppressor, but it closes the gap noticeably.
No. With the 5.56 cap on, the bore opening is sized for .223/5.56 bullets only, and firing a larger caliber through it would strike the cap. Keep your original 7.62 cap and swap back before moving the can to a .30 caliber rifle. The change only takes a few seconds.
No special tooling is required for routine swaps, and the cap is designed to install and remove easily as part of normal suppressor maintenance. If the can has seen heavy use, some carbon buildup around the threads is normal, so a quick cleaning before installation helps everything seat properly. A light coat of anti-seize on the threads is a good habit for any suppressor end cap.
| UPC | 859383006099 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | FC001 |
| Caliber/Gauge | .223 REM/5.56 NATO |
| Length | 1.5 |
| Model | |
| Package Height | 3.0 |
| Package Width | 2.0 |
| Product Type | Accessory-Silencer Accessories |
| Shipping Weight | 0.1 |
You must be logged in to post a review.
Reviews
There are no reviews yet.