Description
Sometimes the best mounting system is no mounting system at all. The Rugged Suppressors Universal Direct Thread Mount takes any suppressor built on the industry standard 1.375×24 HUB thread pattern and turns it into a direct thread can. This version is cut for 1/2×28 muzzle threads, which makes it the go-to pick for 5.56 and .223 rifles, AR-15 builds, and most .22 caliber hosts. Thread it into the back of your can, spin the whole thing onto your barrel, and you're done. No muzzle device to buy, no locking collar to fuss with.
Why Run the Rugged Direct Thread Mount
Direct thread mounting has some real advantages that get overlooked in the quick-detach arms race. It shaves length and weight off the front of your rifle since there's no QD hardware stacking up behind the blast baffle. There are no moving parts to wear out, and the simple threaded connection gives you consistent alignment shot after shot, which your zero will thank you for. For a dedicated host gun where the can lives on the barrel most of the time, this is the cleaner way to do it.
Compatibility Rundown for the Universal Direct Thread Mount
Rugged builds this mount for the Alaskan360 and Alaskan360Ti, but it works with the wider world of HUB-pattern suppressors too, including popular cans from SilencerCo, YHM, Otter Creek Labs, and others that use the 1.375×24 standard. One heads up: it is not compatible with Rugged's Obsidian9 or Obsidian45 pistol cans, which use their own mounting system. The mount wears a black nitride finish, so it shrugs off heat and carbon just like the suppressors it pairs with.
If your rifle collection spans multiple thread pitches, Rugged offers this mount in five options, so you can swap one HUB suppressor across your whole safe by keeping a mount for each host. For the 5.56 and rimfire crowd, this 1/2×28 version is the one to grab.
Key Specifications
- Manufacturer: Rugged Suppressors
- Model: Universal Direct Thread Mount
- Manufacturer Part Number: DTM002
- UPC: 850044499052
- Muzzle Thread Pitch: 1/2×28
- Suppressor Thread Pattern: 1.375×24 (HUB/Bravo)
- Mount Type: Direct Thread
- Finish: Nitride
- Color: Black
- Length: 1.5 in
- Compatibility: Alaskan360, Alaskan360Ti, and other 1.375×24 HUB suppressors
- Not Compatible With: Obsidian9, Obsidian45
What’s Included
- Rugged Suppressors Universal Direct Thread Mount, 1/2×28
Frequently Asked Questions
Will the Rugged Universal Direct Thread Mount work with non-Rugged suppressors?
Yes. It's built around the 1.375×24 HUB thread standard, so it fits most HUB and Bravo pattern suppressors on the market, including popular models from SilencerCo, YHM, Otter Creek Labs, and Energetic Armament. If your can accepts 1.375×24 mounts, this will thread right in. Just note it does not work with Rugged's Obsidian9 or Obsidian45.
What calibers is the 1/2×28 version meant for?
The 1/2×28 thread pitch is the standard for 5.56 NATO and .223 Remington barrels, and it's also common on .22 LR hosts and 9mm carbines. If your rifle has 5/8×24 or metric muzzle threads instead, Rugged makes this same mount in four other pitches, so grab the one that matches your barrel.
How does this mount install?
It threads into the rear of your suppressor's 1.375×24 body, then the whole assembly screws directly onto your muzzle threads hand tight. There's no separate muzzle device required, no locking collars, and no tools needed for routine mounting. It's about as simple as suppressor attachment gets.
Why choose direct thread over a quick-detach mount?
Direct thread keeps your setup shorter and lighter since you're not adding QD hardware to the stack, and with no moving parts there's less to wear out over time. It also delivers very consistent alignment, which helps your zero stay put. It's a great fit for a dedicated host where the suppressor stays on most of the time.




Reviews
There are no reviews yet.