Description
Bullpup shotguns solve a problem that has been around forever: you want barrel length for performance, but a shorter gun for handling. The GForce Arms GFY-1 does exactly that by moving the action and magazine behind the trigger, so you get a full 18.5 inch threaded barrel in a package measuring just 28.5 inches overall. That is shorter than most traditional shotguns with the stock removed, and it makes a real difference working around corners, hallways, or the inside of a vehicle. The layout also shifts the weight back toward your shoulder, so the roughly 7.7 pound gun balances better than the number on paper suggests.
What the GFY-1 Brings to the Table
This is a gas-operated semi-auto based on the Radikal NK-1 design, feeding from detachable box magazines with a 5+1 capacity and a 3 inch chamber. The big win here is magazine compatibility. The GFY-1 runs AR-12 pattern mags and drums, which means plenty of aftermarket options if you want higher capacity down the road. The receiver wears a full-length top Picatinny rail with flip-up front and rear sights installed, plus a bottom rail for a light or foregrip. The barrel is threaded for Benelli Mobil style chokes and ships with a modified tube in place, so you can tighten or open your pattern depending on the load you are running.
Running the GForce GFY-1 at Home and at the Range
The cross-bolt safety and rubber recoil pad round out a control setup that is simple to learn even if this is your first bullpup. Like most gas-driven semi-auto shotguns, this one likes to be broken in with full-power loads before you start feeding it lighter target ammo, so plan your first range trip around buckshot or heavier field loads. Once it is settled in, the GFY-1 makes a compelling case as a home defense gun, a truck gun, or just something genuinely fun to run on the clays and steel you already have set up. There are not many ways to get into a mag-fed bullpup 12 gauge this practical, and this one covers the essentials without making you buy sights and rails separately.
Key Specifications
- Manufacturer: GForce Arms
- Model: GFY-1
- MPN: GFY11220
- UPC: 643477862773
- Gauge: 12 Gauge
- Chamber: 3"
- Action: Gas-Operated Semi-Auto
- Barrel Length: 18.5", Threaded
- Overall Length: 28.5"
- Capacity: 5+1
- Weight: 7.7 lbs
- Sights: Flip-Up Front and Rear, Adjustable
- Rails: Top and Bottom Picatinny
- Choke: Benelli Mobil Style, Modified Included
- Safety: Cross-Bolt
- Stock: Black Polymer Bullpup with Rubber Recoil Pad
What’s Included
- GForce Arms GFY-1 bullpup shotgun
- One 5-round magazine
- Modified choke tube (installed)
- Flip-up front and rear sights (installed)
Frequently Asked Questions
What magazines does the GForce GFY-1 accept?
The GFY-1 feeds from AR-12 pattern box magazines and drums, and it ships with one 5-round mag. That pattern is shared across several popular mag-fed shotguns, so higher capacity sticks and drums are easy to track down from aftermarket makers. It gives the platform solid long-term support beyond what comes in the box.
Can the GFY-1 shoot 3 inch shells?
Yes, it has a 3 inch chamber and handles both 2 3/4 and 3 inch shells. Like most gas-operated semi-auto shotguns, it cycles most reliably with full-power loads, especially during break-in. Run heavier buckshot, slugs, or high-brass field loads for your first couple hundred rounds before switching to light target ammo.
Can I mount a red dot on the GForce Arms GFY-1?
Absolutely. The receiver has a full-length top Picatinny rail, so any rail-mounted red dot or reflex optic bolts right on. The included flip-up sights fold down out of the way, and there is a bottom rail if you want to add a light or foregrip too.
Does the GFY-1 use interchangeable choke tubes?
It does. The 18.5 inch barrel is threaded for Benelli Mobil style chokes, one of the most common thread patterns out there, and a modified choke comes installed from the factory. That lets you tune your pattern for buckshot, switch to a cylinder bore for slugs, or tighten things up for longer shots.





Reviews
There are no reviews yet.