Description
Pistol caliber carbines have earned their spot at the range, and the POF Phoenix is one of the more thoughtfully built examples out there. Patriot Ordnance Factory took the familiar AR platform and reworked it around the 9mm cartridge with a direct blowback system, a design that has proven itself reliable with just about any factory ammo you feed it. Cheap practice loads, defensive hollow points, it runs them all without fuss, and 9mm keeps your range days affordable compared to rifle calibers.
What Sets the Phoenix 9mm Apart
The standout feature is the fully monolithic upper receiver with M-LOK slots, which gives you a rigid one-piece platform for optics and accessories. Up front sits a non-reciprocating dual roller charging handle that can be swapped to either side, so left-handed folks are covered right out of the box. The billet lower carries that same ambidextrous thinking with a mag release and bolt release accessible from both sides. The 16.5 inch nitride heat-treated match barrel wears 1/2×28 threads and a two-port dual chamber muzzle brake, so spinning on a 9mm can is about as easy as it gets. A 1913 Picatinny rail at the rear of the receiver rounds out the setup along with a Mission First Tactical minimalist stock and grip.
Handling and Range Manners
At 5.75 pounds unloaded and 36 inches overall, the Phoenix is light and quick to the shoulder. The self-contained recoil system paired with soft-shooting 9mm makes this an easy gun to run fast, and it is a natural fit for steel plates, carbine drills, or introducing newer folks to the AR platform without the blast and recoil of 5.56.
Feeding the POF Phoenix Rifle
This model ships with POF's proprietary 10-round magazine, a curved-body double stack design built for consistent feeding, plus a polymer mag loader to save your thumbs. Wrapped in a clean Flat Dark Earth Cerakote finish, this is a 9mm carbine that looks as sharp as it runs.
Key Specifications
- Manufacturer: Patriot Ordnance Factory (POF-USA)
- Model: Phoenix Rifle
- MPN: 02062
- UPC: 847313020628
- Caliber: 9x19mm
- Action: Semi-Auto, Direct Blowback
- Capacity: 10+1
- Barrel: 16.5" Nitride Heat-Treated Match
- Muzzle Threads: 1/2×28
- Twist Rate: 1:10
- Muzzle Device: Two-Port Dual Chamber Muzzle Brake
- Upper Receiver: Monolithic with M-LOK
- Lower Receiver: Billet, Ambidextrous Controls
- Stock: Mission First Tactical Minimalist
- Overall Length: 36"
- Weight: 5.75 lbs (unloaded)
What’s Included
- POF Phoenix 9mm rifle
- One 10-round proprietary magazine
- Polymer magazine loader
- Owner's manual
Frequently Asked Questions
Is the POF Phoenix 9mm rifle suppressor ready?
Yes. The 16.5 inch barrel is threaded 1/2×28, which is the standard pitch for most 9mm suppressors. Just remove the factory two-port muzzle brake and thread on your can. The direct blowback action pairs well with suppressed shooting since there is no gas system to tune.
What magazines does the Phoenix use? Will Glock or Colt mags work?
The Phoenix runs on POF's own proprietary magazine, not Glock or Colt pattern mags. This model ships with a 10-round version of that curved double stack design, and it includes a polymer loader to make topping off easier. POF also uses the same magazine platform in their Tombstone lever action, so mags cross over between the two.
Is the charging handle on the POF Phoenix left-hand friendly?
Very much so. The forward charging handle is non-reciprocating and can be mounted on either the left or right side of the rifle. Combine that with the ambidextrous magazine release and bolt release on the billet lower, and lefties get full functionality without any workarounds.
How heavy is the Phoenix 9mm carbine and what is it best suited for?
It comes in at a light 5.75 pounds unloaded with a 36 inch overall length, so it handles quick and carries easy. With mild 9mm recoil and cheap ammo costs, it shines for range plinking, steel challenge style shooting, carbine training, and suppressed setups. It is also a great option for teaching new folks the AR platform.



Reviews
There are no reviews yet.