0
0

Daniel Defense DD5 V4 6.5 Creedmoor 18″ AR-10 Rifle 10+1

UPC: 818773021289

$3,107.00

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

There's a reason the DD5 V4 keeps coming up whenever the conversation turns to serious large-frame ARs. Daniel Defense built this one around a cold hammer forged 18-inch barrel made from their own proprietary steel, chrome-lined for a long service life and cut with a 1:8 twist that stabilizes the heavy, high-BC bullets 6.5 Creedmoor is famous for. That cartridge choice is the whole point here. You get flatter trajectories and less wind drift than a .308 without the extra recoil, and with good match ammo this platform will stretch out to 1,000 meters and beyond.

What Sets the DD5 V4 Apart

The barrel joins the upper through Daniel Defense's 4-Bolt Connection System instead of a traditional barrel nut, which flows straight into the free-floated 15-inch DD5 M-LOK rail. That gives you a rigid, consistent platform with plenty of real estate for a bipod, laser, or whatever else your setup calls for. Underneath the rail sits a user-adjustable gas block on a rifle-length direct impingement system, with dedicated settings for suppressed and unsuppressed fire that you can tweak through the handguard with a hex key. The muzzle wears DD's Superior Suppression Device on standard 5/8×24 threads, so adding a can is about as painless as it gets.

Built to Run, Easy to Live With

The bolt carrier group is where a lot of the magic happens. It's superfinished and DLC coated, so it runs slick with minimal oil and wipes clean without a fight, and the integrated carrier buffer smooths out the recoil impulse noticeably for a 6.5 gas gun. Receivers are machined from 7075-T6 aluminum, the flat-top upper is ready for the optic of your choice, and the 6-position stock and pistol grip both wear DD's grippy SoftTouch overmolding. This configuration feeds from a 10-round PMag and uses a rear takedown pin with an attached pull loop, letting you pop the action open for magazine removal and cleaning. At 8.6 pounds bare, it carries well for a rifle with this much reach, whether that means steel plates way out there or a long sit in deer country.

Key Specifications

  • Manufacturer: Daniel Defense
  • Model: DD5 V4
  • MPN: 02-158-22207-055
  • UPC: 818773021289
  • Caliber: 6.5mm Creedmoor
  • Action: Semi-Auto, Direct Impingement
  • Barrel: 18" Cold Hammer Forged, Chrome Lined, S2W Profile
  • Twist Rate: 1:8
  • Barrel Finish: Black Phosphate
  • Muzzle Device: DD Superior Suppression Device, 5/8×24 Thread
  • Gas System: Rifle-Length, User-Adjustable Gas Block
  • Handguard: DD5 Rail 15.0, 6061-T6 Aluminum, M-LOK
  • Receiver: Machined 7075-T6 Aluminum
  • Capacity: 10+1
  • Sights: None, Optic Ready Flat-Top
  • Weight: 8.6 lbs

What’s Included

  • Daniel Defense DD5 V4 rifle
  • One 10-round Magpul PMag
  • Full-latch impact plastic case

Frequently Asked Questions

How accurate is the Daniel Defense DD5 V4 in 6.5 Creedmoor?

With quality match ammunition, DD5 rifles have a reputation for sub-MOA performance. The cold hammer forged barrel is free-floated under the 15-inch rail and mated to the upper with DD's rigid 4-Bolt Connection System, which keeps things consistent shot after shot. The 1:8 twist handles the 140 grain class bullets that make 6.5 Creedmoor shine at distance.

Is the DD5 V4 suppressor ready?

Yes, and it's one of the rifle's strongest features. The muzzle is threaded 5/8×24 and wears DD's Superior Suppression Device, while the user-adjustable gas block has dedicated suppressed and unsuppressed settings you can switch with a hex key right through the handguard. That means reliable cycling and a consistent feel whether you're running a can or not.

What magazines does the DD5 V4 accept?

The DD5 platform runs on SR-25 pattern magazines, and this rifle ships with one 10-round Magpul PMag. Note that this particular configuration uses a rear takedown pin with a pull loop to open the action for magazine removal, so it handles a bit differently than a standard drop-free mag setup.

Does the Daniel Defense DD5 V4 come with sights or an optic?

No, it ships with a bare flat-top upper so you can mount the glass that fits your shooting. Most owners pair this rifle with a variable-power scope in the 3-15x or 4-16x range to take advantage of the 6.5 Creedmoor's reach, though a quality LPVO works well for closer work. The full-length top rail and M-LOK handguard give you plenty of mounting flexibility.

Additional information

UPC

818773021289

Manufacturer

Manufacturer Part Number

0215822207055

Action

ATF Type

RIFLE

Barrel Finish

Black Phosphate

Barrel Length

18"

Caliber/Gauge

6.5mm Creedmoor

Capacity

10 + 1

Length

37.75

Number of Magazines

1 10 rd. PMag

Package Height

14.0

Package Width

4.0

Product Type

AR

Safety

Safety Selector Switch

Shipping Weight

16.55

Sights

Optic Ready

Thread Pattern

5/8"x24

Reviews

There are no reviews yet.

Be the first to review “Daniel Defense DD5 V4 6.5 Creedmoor 18″ AR-10 Rifle 10+1”