Description
Ten millimeter has a reputation for being snappy. The Vector was built to argue with that. Instead of a slide reciprocating straight back at your grip, the KRISS Super V Recoil Mitigation System runs a closed bolt, delayed blowback action where the bolt travels down and behind the magazine well, redirecting recoil energy away from the bore line. Combine that with a bore axis that sits nearly in line with your hand and the full-power 10mm loads that punish most pistols become genuinely manageable here. Fast follow-up shots with a cartridge this stout are the whole point of this platform.
What the SDP-E G2 Brings to the Table
The Enhanced version of the SDP stretches the barrel to 6.5 inches of 4140 chrome moly with a black nitride finish, threaded 9/16×24 and capped with a thread protector, so suppressors and muzzle devices bolt right on. A mini handguard gives your support hand a proper home, and the low profile flip-up sights fold flat along the full-length Picatinny top rail when you mount an optic. There is a lower rail for a light or laser and a quick detach sling swivel for easy carry. The 1:10 twist rate stabilizes the heavy bullets that make 10mm worth shooting in the first place.
Feeding the Vector 10mm
Magazines are the easy part. The Vector feeds from standard Glock 20 pattern mags, so spares are affordable and everywhere, and it pairs naturally with a Glock 20 as a companion pistol. This model ships with an extended 33 round magazine, which turns a range session into an event and gives you serious capacity on tap for home defense.
Alpine White, Hard to Miss
The Alpine finish is a bold look on an already unmistakable silhouette, and it photographs as good as it shoots. Whether you are building a suppressed 10mm host, adding a brace-ready pistol platform to the safe, or just want the Vector you have been eyeing since it first hit the scene, this one delivers the full experience with the capacity to match.
Key Specifications
- Manufacturer Part Number: KV10-PAP30
- UPC: 811607033793
- Caliber: 10mm Auto
- Action: Semi-Auto, Closed Bolt Delayed Blowback (Super V System)
- Barrel Length: 6.5 in, Threaded
- Thread Pitch: 9/16×24
- Barrel Material: 4140 Chrome Moly, Black Nitride (QPQ)
- Twist Rate: 1:10 RH
- Capacity: 33+1
- Magazine Compatibility: Glock 20 Pattern (10mm)
- Sights: Low Profile Flip-Up, Adjustable
- Trigger: Pivoting Single Stage
- Frame Material: Polymer Composite with Metal Components
- Color: Alpine White
- Weight: Approx. 5.9 lb Unloaded
What’s Included
- KRISS Vector SDP-E G2 10mm pistol
- One 33-round extended magazine
- Barrel thread protector
- Mini handguard
- Owner's manual
Frequently Asked Questions
What magazines does the KRISS Vector SDP-E G2 10mm use?
It feeds from standard Glock 20 pattern 10mm magazines, so 15 rounders and factory Glock mags drop right in. This model ships with an extended 33 round magazine. Mag compatibility with the Glock 20 also makes it a natural pairing if you already run one as a sidearm.
Is the barrel on the Vector SDP-E G2 suppressor ready?
Yes. The 6.5 inch black nitride barrel is threaded 9/16×24, which is the common pitch for 10mm and .45 caliber suppressors and muzzle devices. A thread protector comes installed to keep the threads clean until you are ready to mount something.
Does the Super V system really tame 10mm recoil?
It makes a noticeable difference. Instead of sending recoil straight back into your grip, the bolt travels down and behind the magazine well, redirecting energy off the bore line. Combined with the low bore axis and the pistol's weight, full-power 10mm loads feel far softer than they do out of a traditional handgun.
Can I mount an optic on the Vector SDP-E G2?
Absolutely. The full-length Picatinny top rail accepts red dots and other optics, and the included low profile flip-up sights fold out of the way when you do not need them. There is also a lower rail section for a weapon light or laser.




Reviews
There are no reviews yet.