Description
The CZ TS 2 is what happens when a manufacturer actually listens to competitive shooters and rebuilds their platform from the ground up. This is the second generation of CZ's Tactical Sport series, drawing heavily from the design lessons of the Shadow 2 while being purpose-built for IPSC Standard division and USPSA Limited division competition. It's a full-steel, single-action-only pistol with a 5.28-inch cold hammer-forged barrel, a steel frame, and a slide profile that tapers upward like the Shadow 2's to put reciprocating mass as low as possible. The result is dramatically reduced muzzle flip and follow-up shots that stay on target without a fight. The flat-faced single-action trigger breaks light and clean with very short reset travel, making fast splits genuinely easy.
CZ TS 2 Blue Grip Build and Ergonomics
The grip story on this pistol is one of its best features. The blue anodized duralumin grip panels are flat and thin, which keeps the overall width manageable while the aggressive deep-cut checkering gives you a lock-in hold that doesn't depend on grip tape or gloves. A beavertail undercut lets your hand ride high on the frame, getting you as close to the bore axis as possible. Combined with the flared aluminum magwell and oversized magazine release, reloads are fast and consistent. The ambidextrous manual safety has an extended lever on the left and a low-profile lever on the right, which is exactly how most competitors prefer it. Magazine release is also swappable from side to side.
CZ TS 2 at the Range
With the 5.28-inch barrel and long sight radius, this pistol delivers genuine target-grade accuracy. Accuracy testing with 124-grain loads has produced groups well under 2 inches at 25 yards, which is exactly what you'd expect from a cold hammer-forged barrel at this length. The serrated fiber optic front sight picks up fast under all kinds of lighting, and the fixed serrated rear provides a clear reference without the fuss of adjustability on the base model. Front and rear cocking serrations on the slide give you solid purchase for press-checks or administrative manipulation. The TS 2 is compatible with the extensive aftermarket that has developed around the Tactical Sport platform, so if you want to run custom trigger components, springs, or other upgrades, the parts ecosystem is there.
This is the base model of the TS 2 lineup and the most approachable entry point into serious CZ competition hardware. It was designed with input from the CZ Shooting Team and it shows. If you're getting into IPSC or USPSA, or you just want a high-end range pistol that rewards good technique, this is a hard gun to argue with.
Key Specifications
- Manufacturer: CZ-USA
- Model: TS 2
- MPN: 01220
- UPC: 806703012209
- Caliber: 9mm Luger
- Action: Single-Action Only (SAO)
- Barrel Length: 5.28 in
- Barrel Type: Cold Hammer-Forged
- Overall Length: 8.86 in
- Height: 5.80 in
- Width: 1.57 in
- Weight: 48.5 oz
- Frame Material: Steel
- Grips: Blue Anodized Aluminum (Duralumin)
- Magazine Capacity: 10+1
- Magazine Type: Double Stack
- Sights: Serrated Fiber Optic Front, Serrated Fixed Rear
- Safety: Ambidextrous Manual Safety, Safety Stop on Hammer
- Finish: Black
What’s Included
- CZ TS 2 9mm Pistol
- 3 x 10-Round Magazines
- Owner's Manual
Frequently Asked Questions
What divisions is the CZ TS 2 legal for in competition?
The CZ TS 2 was designed specifically for IPSC Standard division and USPSA Limited division, where a flared magwell, single-action trigger, and higher-capacity magazines are all permitted. Its steel frame and SAO-only trigger configuration align well with the rules for both divisions. It's also a solid choice for Steel Challenge and other action shooting sports.
What is the trigger pull weight on the CZ TS 2?
The TS 2's single-action trigger is exceptionally light, measuring around 1.4 pounds in real-world testing. It has a flat-faced blade with very short reset travel and minimal creep before the break. The trigger also features an adjustable overtravel stop screw, giving you the ability to dial in the feel without swapping components.
How does the CZ TS 2 compare to the Shadow 2?
The Shadow 2 is a DA/SA Production division pistol, while the TS 2 is single-action only and built for Standard and Limited division competition. The TS 2 borrows the Shadow 2's low-profile slide geometry to keep reciprocating weight down, but it adds a flared magwell, more aggressive checkering, and competition-focused controls that the Shadow 2 doesn't have. They're built for different divisions and different shooters.
Does the CZ TS 2 have an optics rail or optics-ready slide?
The base model CZ TS 2 (MPN 01220) does not come with an optics-ready slide or a Picatinny accessory rail. It's designed around its iron sight setup with a serrated fiber optic front and a fixed serrated rear. If you need optics capability in the TS 2 lineup, you'd need to look at other variants or have the slide custom milled.
Is the CZ TS 2 compatible with aftermarket parts from the original Tactical Sport?
Yes, the TS 2 was designed to accept a wide range of custom parts developed for the Tactical Sport platform. There's a well-established aftermarket for springs, trigger components, grips, and other accessories that carry over to this platform. CZ has also confirmed that many TS 2 parts are forward-compatible with newer TS series models.
How heavy is the CZ TS 2 and does that affect shooting?
The TS 2 weighs in at 48.5 ounces unloaded, which is substantial. That weight is a feature, not a drawback, for range and competition use. The steel frame and low-slung slide mass absorb recoil effectively, and the weight distribution keeps the gun tracking flat during rapid fire. Follow-up shots are noticeably easier to control compared to lighter polymer-framed pistols.




Reviews
There are no reviews yet.