Description
Most revolvers send the recoil impulse up and over your hand. The Chiappa Rhino does the opposite. By firing from the bottom chamber of the cylinder instead of the top, the bore sits nearly in line with your wrist and forearm, so the gun pushes straight back rather than flipping skyward. The first time you touch off a full-power .357 Magnum load through one, it catches you off guard in the best way. Muzzle rise is dramatically tamed, and follow-up shots come back on target noticeably faster than with a traditional wheelgun of the same size and weight.
What Sets the Rhino 30SAR Apart
This 30SAR version pairs a 3 inch vent rib barrel with a single action trigger, which keeps the trigger pull light and crisp. What looks like a hammer on the back of the frame is a cocking lever that operates the fully enclosed internal hammer, and a visible cocked indicator tells you the gun's status at a glance. The six-round cylinder is machined with flat sides in a hexagonal profile, trimming width off the gun compared to a round cylinder of the same capacity. Chamber it with .357 Magnum or .38 Special, and the included moon clips speed up reloads and make ejecting spent cases a breeze.
Built Light, Sighted Right
The frame is aluminum alloy, keeping the whole package around 27 ounces unloaded, while the blued steel cylinder handles the pressure end of things. The black anodized finish gives it a clean, businesslike look, and the black rubber grip soaks up what little recoil the low bore axis leaves behind. Up top, a fiber optic front sight pairs with an adjustable rear so you can dial in your preferred load and pick up the sight picture quickly in changing light.
At 7.5 inches overall, the Rhino 30SAR splits the difference between a range toy and a working gun. It is compact enough to carry comfortably, accurate enough to ring steel all afternoon, and unlike anything else in the case. Once you run a cylinder through one, most other snub-length magnums feel a bit dated.
Key Specifications
- Manufacturer: Chiappa Firearms
- Model: Rhino 30SAR
- MPN: CF340.289
- UPC: 8053800940054
- Caliber: .357 Magnum / .38 Special
- Action: Single Action
- Capacity: 6 Rounds
- Barrel Length: 3" Vent Rib
- Overall Length: 7.5"
- Weight (Unloaded): 27.2 oz
- Frame Material: Aluminum Alloy
- Frame Finish: Black Anodized
- Cylinder: Blued Steel, Hexagonal Profile
- Grips: Black Rubber
- Front Sight: Fiber Optic
- Rear Sight: Adjustable Fiber Optic
What’s Included
- Chiappa Rhino 30SAR revolver
- 3 moon clips
- Owner's manual
Frequently Asked Questions
Can the Chiappa Rhino 30SAR shoot .38 Special as well as .357 Magnum?
Yes. Like any .357 Magnum revolver, the Rhino 30SAR happily runs .38 Special, which is a great option for lower-cost practice sessions and softer recoil. The included moon clips work with your ammo to keep reloads quick and extraction clean.
Is the Rhino 30SAR single action only?
It is. The SAR designation means the trigger only fires after you cock the gun using the external cocking lever, which gives you a light, crisp pull for every shot. The lever looks like a hammer but simply cocks the enclosed internal hammer, and a cocked indicator shows you the gun's status at a glance.
Does the low bore axis on the Rhino really reduce recoil?
It genuinely changes how the gun behaves. Because the Rhino fires from the bottom chamber of the cylinder, the bore sits nearly in line with your wrist, so recoil drives straight back into your arm instead of rotating the muzzle upward. Felt recoil is milder than a traditional revolver of similar weight, and getting back on target between shots is noticeably quicker.
How heavy is the Chiappa Rhino 30SAR and is it practical to carry?
The aluminum alloy frame keeps it around 27 ounces unloaded with a 7.5 inch overall length, which is very manageable for a 6-shot .357. The hexagonal cylinder also trims width compared to a round cylinder, and the enclosed hammer design means there is no spur to snag on clothing.





Reviews
There are no reviews yet.