Description
Every ounce matters when you're climbing to a glassing knob before first light, and Browning built the X-Bolt 2 Mountain Pro around that idea. At roughly 6.6 pounds unloaded, this .30-06 keeps the weight off through smart engineering rather than cut corners. The receiver is stainless steel with excess material machined away, the bolt is spiral fluted, and the bolt handle is lightweight aluminum with a hollow knob. The 22 inch spiral-fluted stainless barrel sheds weight too, and the fluting helps it cool faster between shots. It comes threaded at 5/8×24 with Browning's Recoil Hawg muzzle brake installed and a thread protector in the box, so you can run the brake, go bare muzzle, or spin on a suppressor.
A Carbon Fiber Stock That Earns Its Keep
The one-piece wrapped carbon fiber stock is the heart of this rifle. It's stiff enough to resist flex on offhand shots, filled with noise-dampening foam so it stays quiet brushing through timber, and bedded with a compression-molded carbon fiber block that keeps the action rock solid. The adjustable comb lets you dial in proper eye alignment behind a scope, even a big one, and length of pull adjusts to fit you rather than the other way around. A thick Inflex recoil pad takes the edge off the '06, and the brake handles the rest.
Why the X-Bolt 2 Mountain Pro in .30-06 Makes Sense
The .30-06 Springfield remains one of the most versatile big game cartridges going, with factory loads for everything from antelope to elk and ammo on the shelf at just about any shop in the country. Feeding from a 4+1 rotary magazine, cycling through Browning's smooth short-lift bolt, and breaking shots on the crisp DLX trigger set at 3.5 pounds from the factory, this rifle makes that old workhorse cartridge feel thoroughly modern. Cerakote over stainless means weather is a non-issue. Top it with glass using the X-Lock mounting system and it's ready for the season.
Key Specifications
- Manufacturer: Browning
- Manufacturer Part Number: 036086226
- UPC: 023614865377
- Caliber: .30-06 Springfield
- Action: Bolt Action, Long Action
- Barrel Length: 22 inches, spiral fluted stainless steel
- Muzzle: Threaded 5/8×24 with Recoil Hawg brake
- Capacity: 4+1
- Stock: Carbon fiber, adjustable comb and length of pull
- Trigger: DLX, factory set at 3.5 lbs, adjustable to 3.0 lbs
- Safety: Top tang
- Sights: None, receiver ready for X-Lock scope mounting
- Overall Length: 42.75 inches
- Weight: 6.6 lbs unloaded
- Recoil Pad: Inflex
What’s Included
- Browning X-Bolt 2 Mountain Pro rifle
- One 4-round rotary magazine
- Recoil Hawg muzzle brake (installed)
- Thread protector
- Comb adjustment spacers
- Owner's manual
Frequently Asked Questions
Can I run a suppressor on the X-Bolt 2 Mountain Pro?
Yes. The muzzle is threaded 5/8×24, which is the standard thread pitch for most .30 caliber suppressors and muzzle devices. Just remove the Recoil Hawg brake and thread on your can, or use the included thread protector if you want a clean muzzle.
How much does the Browning X-Bolt 2 Mountain Pro weigh?
This .30-06 configuration comes in around 6.6 pounds unloaded. The carbon fiber stock, machined stainless receiver, spiral-fluted bolt and barrel, and aluminum bolt handle all contribute to keeping it light. Add a reasonable scope and sling and you're still carrying a very packable rig for backcountry hunts.
Is the trigger adjustable on this rifle?
It is. The Mountain Pro uses Browning's DLX trigger, a three-lever design with essentially no creep, take-up, or overtravel. It ships set at 3.5 pounds from the factory and can be adjusted down to 3.0 pounds.
Does the X-Bolt 2 Mountain Pro come with sights or a scope rail?
No iron sights are included, since this rifle is built to run an optic. The receiver is set up for Browning's X-Lock scope mounting system, which uses four screws per base instead of two for a more secure hold. X-Lock bases and rings are sold separately.



Reviews
There are no reviews yet.