Description
If your full-size 1911 has gotten a little mushy, or you're building one from a parts kit, this is the spring set that gets it running right. Wilson Combat designed kit 316G specifically for the 5" Government .45 ACP, and it includes every spring you'd want to replace during a full service or upgrade. The springs are made from heat-treated music wire, which is the standard Wilson is known for. They hold their tension over thousands of rounds instead of going soft on you.
Here's what's in the box: an 18.5 lb recoil spring (P10G18), a 19 lb reduced-power hammer spring (P27), an extra-power firing pin spring (P26), a mag catch spring (R15A), a sear spring (R29), and a plunger tube spring (R33PS). The 18.5 lb recoil spring is right in the sweet spot for 230 grain hardball and standard-pressure defensive loads, and the extra-power firing pin spring helps keep things reliable across standard and high-velocity ammo. The reduced-power hammer spring is the one folks notice most. It lightens the trigger pull and makes the slide a touch easier to rack.
This kit is a favorite for owners of budget and import 1911s like Rock Island, Tisas, Girsan, ATI, and Taurus, where the factory springs often leave something on the table. Drop these in and the difference is hard to miss. It's also a smart buy for anyone who wants a spare set on the shelf for range maintenance.
One honest heads-up: the sear/leaf spring needs to be hand-tuned to your pistol, which is normal territory on the 1911 platform and not a drop-in part. The rest of the springs install easily. If you're not comfortable tuning a leaf spring and running your safety checks, have a gunsmith handle that piece. Always wear eye protection when working with springs.
Key Specifications
- Manufacturer: Wilson Combat
- Manufacturer Part Number: 316G
- Fits: Full-Size 5" 1911 Government, .45 ACP
- Product Type: Complete Spring Kit
- Material: Heat-treated music wire
- Recoil Spring: 18.5 lb (P10G18)
- Hammer Spring: 19 lb reduced power (P27)
- Firing Pin Spring: Extra power (P26)
- Also Includes: Mag catch spring (R15A), sear spring (R29), plunger tube spring (R33PS)
- UPC: 874218000875
Frequently Asked Questions
Will this fit my import 1911 like a Rock Island, Tisas, or Girsan?
Yes, it's a popular upgrade for full-size 5" 1911s including Rock Island, Tisas, Girsan, ATI, and Taurus models. Owners regularly report a noticeable improvement over the soft factory springs these guns often ship with. On Rock Islands you may need minor fitting, which is normal for the platform.
What recoil spring weight is in the kit and what ammo is it best for?
The kit comes with an 18.5 lb recoil spring. That weight is well matched to 230 grain hardball equivalent and standard-pressure JHP self-defense loads. It's a solid all-around choice for a full-size .45.
Is this a drop-in kit or does it require gunsmithing?
Most of the springs are simple drop-in installs. The exception is the sear/leaf spring, which needs to be hand-tuned to your specific pistol since it controls the sear, disconnector, and grip safety. If you're not confident tuning a leaf spring and running proper safety checks, have a gunsmith handle that part.
Why would I swap in a reduced-power hammer spring?
The 19 lb reduced-power hammer spring lightens your trigger pull and reduces the effort needed to rack the slide. It still reliably ignites primers in normal use. It's one of the most-noticed improvements in the kit.
Does this work for rebuilding an older or worn 1911?
Absolutely, that's one of its best uses. It includes the springs typically replaced during a full service or refresh, and owners of older Colts and other vintage 1911s report the gun running like new afterward. It's also handy to keep a spare set on hand for range maintenance.




Reviews
There are no reviews yet.