Description
Pistol-caliber suppressors like the Rugged Obsidian 45 and Obsidian 9 ship set up with a booster (Nielsen device) so they can run on tilting-barrel pistols. Thing is, a booster does nothing for you on a fixed-barrel host, and running one where it is not needed just adds moving parts. That is where this Fixed Mount comes in. It swaps in place of the entire booster system and turns your Obsidian into a simple direct thread can for 1/2×36 barrels, which is the common thread pitch on 9mm AR-style carbines and pistols.
Why the Rugged Fixed Mount Makes Sense on Fixed Barrels
With the booster gone, the suppressor threads straight onto the mount with nothing left to rattle or work loose under recoil. Fewer parts means fewer things to keep track of at the range, and it trims a bit of unnecessary hardware off the back of your can. If your 9mm carbine, PCC, or subgun has a barrel that does not move under recoil, this is the way Rugged intends you to run it.
Fitment Notes for the OF002 Fixed Mount
A couple of things worth knowing before you order. This is a standalone mounting solution, so it is not designed to work alongside the 3 Lug Mount or the Fixed Barrel Spacer. Pick one system for your host and stick with it. Also double check your muzzle threads, since Rugged makes this mount in several pitches and this one is specifically 1/2×36. If your barrel is 1/2×28, grab the OF001 version instead.
Factory Rugged Quality, Black Finish
Because this is a genuine Rugged Suppressors part (MPN OF002), fit and thread engagement with the Obsidian line are exactly what they should be. The black finish blends right in with the rest of the can, and installation is about as straightforward as suppressor accessories get. Swap out the booster, thread on the mount, and get back to shooting quiet.
Key Specifications
- Manufacturer: Rugged Suppressors
- Manufacturer Part Number: OF002
- UPC: 859383006365
- Model: Fixed Mount
- Product Type: Direct Thread Suppressor Mount
- Thread Pitch: 1/2×36
- Compatibility: Rugged Obsidian 45 and Obsidian 9 suppressors
- Intended Host: Fixed-barrel carbines, PCCs, and subguns
- Finish: Black
- Length: 2.5 in
- Made In: USA
What’s Included
- Rugged Suppressors Fixed Mount, 1/2×36
Frequently Asked Questions
Which suppressors does the Rugged Fixed Mount 1/2×36 work with?
It is made for the Rugged Obsidian 45 and Obsidian 9. The mount replaces the factory booster system on those cans, converting them to direct thread for fixed-barrel hosts. It is a genuine Rugged part, so thread fit with the Obsidian line is spot on.
Do I still need the booster or Fixed Barrel Spacer with this mount?
No, and that is the whole point. The Fixed Mount is a standalone piece that takes the place of the entire booster assembly, and it is not designed to be used with the Fixed Barrel Spacer or the 3 Lug Mount. On a fixed barrel there is no reciprocating action to time, so a simple direct thread connection is the cleaner setup.
What guns typically have 1/2×36 muzzle threads?
The 1/2×36 pitch is the standard thread for most 9mm AR-pattern carbines and pistols, along with a good number of other 9mm PCCs. It exists specifically so you cannot accidentally cross-mount 5.56 muzzle devices, which use 1/2×28. Check your barrel markings before ordering, and if yours is 1/2×28, Rugged offers this same mount in that pitch as the OF001.
Can I leave the Fixed Mount installed and switch back to a pistol later?
You can swap back, but not on the fly. To run your Obsidian on a tilting-barrel pistol again you will need to remove the Fixed Mount and reinstall the booster assembly, since semi-auto pistols need that piston movement to cycle reliably. It only takes a few minutes with basic disassembly, so plenty of folks switch between setups depending on the host.








Reviews
There are no reviews yet.