0
0

Rugged Suppressors R3 Flash Mitigation System 5/8×24 Flash Hider

UPC: 859383006044

$80.00

72 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Most three-prong flash hiders come with a catch: that annoying tuning fork ring every time you send a round downrange. Rugged sorted that out with the R3 Flash Mitigation System. The variable fluted prongs are cut so the device stays quiet between shots while still tearing apart muzzle flash, and it does the job in a footprint that measures about 2.13 inches long and weighs a mere 2.5 ounces. That is noticeably trimmer than a lot of competing designs, so your rifle keeps its balance instead of feeling nose-heavy.

More Than a Flash Hider, It's Your Suppressor Mount

Here is where the R3 earns its keep. This 5/8×24 muzzle device is built around Rugged's Dual Taper Locking System, a completely toothless, snag-free interface that serves as the mounting point for the Radiant762, Surge 7.62, Razor 7.62, and Micro30 suppressors. The dual taper design centers the can and locks it up the same way every time, which means consistent alignment and repeatable point of impact when you thread your suppressor on and off. No ratchet teeth to wear out, no sharp edges to catch on gear or gun cases.

Where the R3 5/8×24 Fits Best

The 5/8×24 thread pitch makes this the go-to choice for .308, 6.5 Creedmoor, .300 Blackout, and most other 30 caliber rifles with standard threading. Bolt guns, AR-10s, large-frame pistols, it covers a lot of ground. Even if your suppressor spends most of its time on another host, leaving an R3 on each rifle means swapping the can between guns takes seconds instead of a trip to the workbench.

Built to Rugged Standards

Like everything Rugged puts out, the R3 is made in the USA and backed by the company's unconditional lifetime warranty. Finished in black, it looks right at home on a working rifle, and it will hold up to the abuse a muzzle device is supposed to take. If you run a Rugged 7.62 can or plan to, this is the mount worth putting on every host in the safe.

Key Specifications

  • Manufacturer: Rugged Suppressors
  • Model: R3 Flash Mitigation System
  • MPN: FH002
  • UPC: 859383006044
  • Thread Pattern: 5/8"-24 tpi
  • Length: 2.13 in
  • Weight: 2.5 oz
  • Finish: Black
  • Mounting Interface: Dual Taper Locking System
  • Suppressor Compatibility: Radiant762, Surge 7.62, Razor 7.62, Micro30
  • Design: Variable fluted prongs, zero ring
  • Country of Origin: USA

What’s Included

  • Rugged Suppressors R3 Flash Mitigation System 5/8×24 flash hider

Frequently Asked Questions

Which suppressors does the R3 Flash Mitigation System work with?

The R3 uses Rugged's Dual Taper Locking System, which mounts the Radiant762, Surge 7.62, Razor 7.62, and Micro30. If you own any of Rugged's rifle or multi-caliber cans with that interface, this flash hider serves as your attachment point. It is not a mount for suppressors from other brands.

Does the Rugged R3 ring like other prong-style flash hiders?

No, and that is one of its biggest selling points. The prongs are variably fluted, which eliminates the tuning fork ring you get from a lot of three-prong designs. You get the flash reduction of a prong hider without the annoying hum after each shot.

What rifles will the 5/8×24 R3 fit?

Any rifle with a standard 5/8×24 threaded muzzle, which covers most .308, 6.5 Creedmoor, and .300 Blackout barrels along with plenty of other 30 caliber setups. Just confirm your barrel's thread pitch before ordering. Rugged also makes the R3 in other thread patterns if your rifle runs something different.

Can I shoot without a suppressor attached to the R3?

Absolutely. The R3 works as a standalone flash hider and does that job very well thanks to its prong design. Many folks leave one on each rifle so their Rugged can moves between hosts quickly, and the toothless, snag-free profile means nothing catches on slings or cases in the meantime.

Additional information

UPC

859383006044

Manufacturer

Manufacturer Part Number

FH002

Length

1.5

Model

Package Height

3.0

Package Width

2.0

Product Type

Accessory-Silencer Accessories

Shipping Weight

0.2

Thread Pattern

5/8"-24 tpi

Reviews

There are no reviews yet.

Be the first to review “Rugged Suppressors R3 Flash Mitigation System 5/8×24 Flash Hider”