$313.50
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Odin Works .223 Wylde 18" 3-Gun barrel is one of those parts that quietly does the heavy lifting on a well-built AR-15. It's cut from 416R stainless steel, button rifled, and hand lapped, which is the kind of attention to detail you feel downrange more than you see on a spec sheet. The .223 Wylde chamber is the smart middle ground a lot of folks land on: a tighter throat than a straight 5.56 for better accuracy, but still able to run higher-pressure 5.56 NATO ammo when that's what's on the shelf. You get to feed it either without babying anything.
The 3-Gun profile is the sweet spot here. At 18 inches with a rifle-length gas system, you're squeezing solid velocity out of your loads without turning the rifle into a boat anchor up front. This one weighs in right around 2.15 pounds, so it stays quick to transition between targets, which is the whole point of a 3-Gun setup. The 1:8 twist is versatile too, handling everything from lighter varmint bullets up through heavier match projectiles, so you're not locked into one bullet weight to get your best groups.
Odin backs this barrel with a 1 MOA guarantee, and real-world feedback backs that up, with users reporting sub-MOA groups once they've got a load dialed in. It ships with a stainless steel tunable gas block, which is a genuinely useful extra. You can throttle the gas to smooth out recoil, cut down on brass beating, and get cycling just right whether you're running a suppressor or shooting bare muzzle.
The muzzle is threaded 1/2×28, so your favorite muzzle device, brake, or suppressor mount threads right on. M4 feed ramps come machined in, making this a straightforward drop-in for a standard AR-15 upper. If you're chasing accuracy without giving up the fast handling that a 3-Gun stage demands, this Odin Works barrel earns its spot.
Yes. The .223 Wylde chamber is designed as a hybrid that safely runs higher-pressure 5.56 NATO ammo while also getting better accuracy out of match .223 Remington loads. The tighter throat compared to a standard 5.56 chamber is where that accuracy edge comes from, and you don't have to choose one ammo type over the other.
It does. This barrel ships with an Odin Works stainless steel tunable gas block included. That lets you adjust the gas flow to fine-tune cycling, reduce felt recoil, and set things up right whether you're shooting suppressed or bare muzzle.
The 1:8 twist is a versatile choice that stabilizes a wide range of projectiles, roughly from lighter 55-grain bullets up through heavier 77-grain match rounds. That flexibility is a big reason it's a favorite for 3-Gun and general-purpose builds, since you're not locked into a single load to get your best groups.
Yes. It's machined with M4 feed ramps and uses a rifle-length gas system, so it drops into a standard AR-15 upper with the matching gas tube. The muzzle is threaded 1/2×28 for common muzzle devices and suppressor mounts.
| UPC | 857392006512 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | B-223-18-3G-R-TG |
| Product Type | Barrel |
| Color | Silver |
| Caliber/Gauge | .223 Wylde |
| Barrel Length | 18" |
You must be logged in to post a review.
Reviews
There are no reviews yet.