Description
Daniel Defense built its reputation on barrels, and this 16-inch Government Profile is a big part of why. It's cold hammer forged from 4150 chrome moly vanadium steel, chrome lined inside, and finished in mil-spec heavy phosphate on the outside. That combination is what serious builders reach for when they want a barrel that holds accuracy through long strings of fire and years of hard use.
What the Government Profile Brings to Your AR-15 Build
The Government contour keeps more meat under the handguard and a thinner section out front, which is the same profile the military has leaned on for decades. It runs a mid-length gas system, and that's the sweet spot for a 16-inch build. The longer dwell time smooths out the cycling, softens felt recoil, and eases wear on your bolt and carrier compared to a carbine-length setup. The muzzle is threaded 1/2×28, so it takes just about any standard flash hider, comp, or brake you want to hang on it.
Why Cold Hammer Forging Matters on This 5.56 Barrel
Cold hammer forging shapes the bore, chamber, lands, and grooves all at once as carbide hammers pound the steel around a mandrel. The result is a dense, uniform bore with a consistent chamber and very few defects, which translates to better accuracy and a longer service life than cut or button-rifled barrels. Every one of these is made start to finish at Daniel Defense's facility in Black Creek, Georgia.
Twist Rate and Feeding
The 1:7 twist stabilizes heavier match and duty projectiles without any trouble, and it still shoots common 55-grain bulk ammo just fine. Real-world users report tight groups holding up well past 10,000 rounds, which tells you plenty about how this barrel wears. If you're chasing a build that balances accuracy, durability, and that classic mid-length feel, this one earns its spot.
Key Specifications
- Manufacturer: Daniel Defense
- Manufacturer Part Number: 07-077-09173-018
- UPC: 852548002462
- Model: AR-15
- Caliber: .223 REM / 5.56 NATO
- Barrel Length: 16''
- Profile: Government
- Twist Rate: 1:7
- Gas System: Mid-Length
- Manufacturing Process: Cold Hammer Forged
- Barrel Material: 4150 Chrome Moly Vanadium Steel
- Bore Finish: Chrome Lined
- Exterior Finish: Mil-Spec Heavy Phosphate (Black)
- Muzzle Thread: 1/2×28 TPI
- Gas Port Diameter: .750''
- Barrel Extension: M4/A4
What’s Included
- Daniel Defense 16in Government Profile mid-length 5.56 barrel (stripped)
Frequently Asked Questions
Does the Daniel Defense 16in Government barrel come with a gas block or muzzle device?
No, this is the stripped barrel version. It does not include a gas block, gas tube, or muzzle device, so you'll want to source those separately for your build. The muzzle is threaded 1/2×28, which accepts standard flash hiders, comps, and brakes.
What ammo works best with the 1:7 twist on this barrel?
The 1:7 twist is the most versatile option for 5.56, stabilizing everything from lightweight 55-grain plinking loads up to heavier 62, 69, 75, and 77-grain match and duty projectiles. If you're running heavier bullets for distance work, this twist handles them without issue. It also does just fine with cheap bulk 55-grain range ammo.
Why choose a mid-length gas system over carbine length on a 16-inch build?
On a 16-inch barrel, the mid-length gas system gives you a longer dwell time that smooths out the cycling and reduces felt recoil. It also spreads out the pressure curve, which means less wear and tear on your bolt, carrier, and other moving parts. It's widely considered the ideal pairing for a 16-inch barrel.
What makes the cold hammer forged barrel worth it?
Cold hammer forging shapes the bore, chamber, and rifling all at once under intense pressure, producing an exceptionally uniform bore with very few defects. That process is known for delivering better accuracy and a longer service life than traditional cut or button-rifled barrels. Owners regularly report their Daniel Defense barrels holding accuracy well beyond 10,000 rounds.




Reviews
There are no reviews yet.