0
0

Fortis SWITCH Rail 15.3-inch M-LOK Mod 1 AR-15 Handguard, Black

UPC: 850015927720

$242.20

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Fortis SWITCH Rail Mod 1 does something most handguards can't: it comes off your rifle without tools. The whole design centers on a patent-pending locking handle that clamps the rail onto its dedicated barrel nut, so once the nut is torqued and clocked, you flip the latch open and the rail slides right off. That makes zeroing a gas block, cleaning, or switching to a different length rail a two-minute job instead of a bench session, which is exactly why it earned a following with 3-Gun and multi-caliber builders.

At 15.3 inches this is the full rifle-length option in the SWITCH lineup, giving you a long, uninterrupted top rail for optics, back-up irons, or a night vision setup up front. The tube itself is cut from aircraft-grade 6061-T6 aluminum with the locking handle machined from 7075-T6, and it wears a Type III hardcoat anodized finish that holds up to real use. Even at this length it stays light, coming in right around 10 ounces for the rail with the barrel nut adding just under 2 more.

What Sets the SWITCH Mod 1 Apart

M-LOK slots run along the 3, 6, and 9 o'clock positions so you can hang lights, a bipod, a hand stop, or grips wherever they land right for you, and there are QD mounting points built in for a sling. The Mod 1 keeps a continuous Picatinny top rail from end to end, which is the main thing that separates it from the vented Mod 2. If you want a solid rail surface for irons or mounting hardware across the whole top, this is the one to grab.

Dialing In Your Fortis SWITCH Rail Install

Installation is straightforward but there are a couple of things to know going in. The SWITCH runs on a low-profile gas block, and you'll need to pull the delta ring off the upper to seat the Fortis barrel nut. Torque and clock that nut so a notch lines up with the gas tube, run the tube, then slide the rail on until it fully stops on the nut before closing the handle. Get it fully seated and torqued down and you get rock-solid lockup with no wobble or return-to-zero issues.

Key Specifications

  • Manufacturer: Fortis Manufacturing
  • Manufacturer Part Number: 556-SWITCH-M1-153-ML
  • UPC: 850015927720
  • Model: SWITCH Mod 1
  • Length: 15.3 inches
  • Attachment System: M-LOK
  • Mounting Style: Free-float, tool-less quick-detach
  • Top Rail: Continuous full-length Picatinny
  • Rail Material: 6061-T6 aircraft-grade aluminum
  • Locking Handle Material: 7075-T6 aluminum
  • Finish: Type III hardcoat anodized, Black
  • Rail Weight: Approx. 10.04 oz
  • Barrel Nut Weight: Approx. 1.7 oz
  • Fitment: AR-15 / 5.56 NATO uppers
  • Made In: USA

What’s Included

  • Fortis SWITCH Mod 1 15.3-inch M-LOK handguard
  • Fortis SWITCH barrel nut

Frequently Asked Questions

Is the Fortis SWITCH Rail really tool-less to remove?

Yes. Once the barrel nut is installed and torqued, the rail clamps on with a patent-pending locking handle that you open and close by hand. Depress the latch, pivot the handle open, and the rail slides right off the nut, which makes it easy to swap rails or service a gas block in seconds.

What do I need to install the SWITCH Mod 1 on my AR-15?

You'll need a low-profile gas block, since the standard front sight base won't clear the rail, and you'll have to remove the delta ring assembly to seat the included Fortis barrel nut. Clock the nut so a notch lines up with the gas tube, then run the tube before sliding the rail on. It fits standard AR-15 and 5.56 NATO uppers.

What's the difference between the Mod 1 and Mod 2 SWITCH rails?

The Mod 1 has a continuous Picatinny top rail running the full length, which is ideal if you want back-up irons or hardware mounted across the whole top. The Mod 2 swaps some of that top rail for venting to trim a little weight and improve airflow. Both use the same tool-less locking system and M-LOK slots.

Does the barrel nut come with the SWITCH Rail?

Yes. The handguard ships with its dedicated Fortis barrel nut, which is what the rail clamps onto. Keep in mind you don't get a gas block, gas tube, or armorer's tools in the box, so plan on having those on hand for the build.

Additional information

UPC

850015927720

Manufacturer

Manufacturer Part Number

556-SWITCH-M1-153-ML

Color

Black

Product Type

Handguard

Reviews

There are no reviews yet.

Be the first to review “Fortis SWITCH Rail 15.3-inch M-LOK Mod 1 AR-15 Handguard, Black”