Description
Swapping a mil-spec trigger for the POF Drop-In Single-Stage Trigger is one of the fastest ways to change how your AR-15 or AR-10 feels at the range. This is a self-contained unit, meaning the trigger, disconnect, and hammer all live inside one anodized aluminum housing that drops straight into a mil-spec lower. You get a fixed 3.5 lb pull with a clean break and a quick reset, which is light enough for precise shot placement but still has enough weight behind it to feel controlled. It comes ready to run with no gunsmithing or fiddling required.
What Sets the POF 3.5 lb Drop-In Trigger Apart
Patriot Ordnance Factory builds the trigger, disconnect, and hammer from American A2 steel and nitride heat-treats them to 70 Rockwell case hardness. That treatment is where the strength and corrosion resistance come from, and it is a big reason folks report these staying consistent well past the thousand-round mark. The housing wears a hardcoat anodized finish and rides on POF's signature rubber urethane feet, which keep the whole assembly snug and rattle-free inside the receiver.
Fitment and Installation of the POF Drop-In Trigger
This single-stage group is designed for AR-type lowers cut to mil-spec dimensions, and that covers a wide range of calibers from .223/5.56 up through .308 and 6.5. It fits both standard AR and POF-USA ambidextrous lower receivers thanks to the included custom-fit KNS Precision anti-walk pins. Installation is about as simple as it gets: pull your rear takedown pin, knock out the two trigger pins, remove your factory parts, seat the new unit, and lock it in. You will want a Torx driver on hand for the pin screws to finish the job. One thing worth noting is that it is built for rifle-caliber ARs, so it is not the pick for pistol-caliber builds.
Whether you are finishing a precision build, setting up a hunting rig, or just tired of a gritty stock trigger, this one delivers a noticeable improvement the first time you press it.
Key Specifications
- Manufacturer: Patriot Ordnance Factory
- Manufacturer Part Number: 00858
- UPC: 847313008589
- Model: Drop-In
- Style: Single-Stage, Non-Adjustable
- Pull Weight: 3.5 lb
- Trigger Shoe: Straight
- Housing Material: Hardcoat Anodized Aluminum with Rubber Urethane Feet
- Trigger/Disconnect/Hammer Material: American A2 Steel, Nitride Heat-Treated to 70 Rockwell
- Color: Black
- Compatibility: Standard AR and POF-USA Ambidextrous Mil-Spec Lowers (AR-15/AR-10)
- Length: 7.2 in
- Installation: Pre-Assembled, Drop-In, No Gunsmithing Required
- Country of Origin: USA
What’s Included
- Pre-assembled single-stage drop-in trigger unit
- Custom-fit stainless steel KNS Precision anti-walk pins
Frequently Asked Questions
Will the POF drop-in trigger fit my rifle?
It is designed for AR-type lower receivers cut to mil-spec dimensions, which covers most standard AR-15 and AR-10 platforms in calibers like .223/5.56, .308, and 6.5. It also works with POF-USA ambidextrous lowers thanks to the included KNS pins. One exception to keep in mind is that it will not fit a DPMS .308 lower unless that lower uses mil-spec parts.
Is the 3.5 lb pull weight adjustable?
No, this is a fixed, non-adjustable single-stage trigger set at 3.5 lb from the factory. That keeps things simple since it is pre-tuned and ready to run right out of the box. If you want a heavier break, POF offers the same drop-in design in a 4.5 lb version.
What tools do I need to install this POF drop-in trigger?
Installation is straightforward: pull your rear takedown pin, knock out the two trigger pins, swap in the new unit, and set the anti-walk pins. You will need a Torx driver for the pin screws to finish, and owners typically reach for a T8 or T10 depending on their setup. Most people have it done in a few minutes with basic hand tools.
Can I use this trigger in a pistol-caliber AR?
It is built for rifle-caliber AR platforms and is not recommended for pistol-caliber firearms like 9mm, .40 S&W, .45 ACP, or 10mm. Running it in a PCC setup is not what it was engineered for. Stick with it for your rifle-caliber builds and it will serve you well.



Reviews
There are no reviews yet.