Description
The Magpul PRS Gen3 has earned its reputation as one of the go-to stocks for anyone chasing consistency behind an AR platform. Built for AR-15/M16 and AR-10/SR-25 rifles, it gives you tool-less adjustment for both length of pull and cheek piece height by way of machined aluminum knobs that click into positive locking detents. That means once you set your fit, it stays put shot after shot, which is exactly what you want when you're stacking rounds at distance.
What Makes the PRS Gen3 a Precision Workhorse
This is a heavy-duty stock, and that's by design. The steel adjustment shafts are finished in Melonite for wear and corrosion resistance, while all the aluminum components wear a Type III hard-anodized coating that shrugs off the kind of abuse a range rifle sees over the years. The enhanced-strength butt-plate is rated to handle recoil all the way up to .50 BMG, so you're not going to out-punch it with a standard AR chambering. The rubber butt-pad is adjustable for both cant and height and grips your shoulder so the gun doesn't wander during a string.
Fit, Mounting, and Setup on the PRS Gen3
The Gen3 is optimized for rifle-length receiver extensions and mounts up without an A2 spacer. It'll also work with many mil-spec carbine and A5-length tubes, though a rifle-length tube is the surest bet for a clean fit. Length of pull runs roughly 14.3 to 15.7 inches on an M16 setup with about 1.4 inches of LOP travel, and the comb gives you 0.8 inches of cheek height adjustment. Keep in mind the buffer tube, castle nut, and end plate aren't included, so plan on sourcing those if you don't already have them.
Sling and Accessory Options
Magpul didn't skimp on mounting points either. The Gen3 comes with rotation-limiting QD sling swivel cups plus a reversible 1.25-inch aluminum sling loop, and there are M-LOK slots on the bottom of the stock for adding a rear monopod, an extra QD socket, or a section of Picatinny rail. Made in the USA, it's a stock that fits precision, varmint, and long-range builds alike.
Key Specifications
- Manufacturer: Magpul Industries
- Model: PRS Gen3
- Manufacturer Part Number: MAG672-BLK
- UPC: 840815109594
- Color: Black
- Platform Compatibility: AR-15/M16 and AR-10/SR-25
- Length: 11.5 – 12.9 in
- LOP Adjustment Range: 1.4 in
- LOP (M16, Collapsed to Extended): ~14.3 – 15.7 in
- Cheek Height Adjustment Range: 0.8 in
- Weight (stock only): 27.8 oz
- Materials: Aluminum and Steel
- Finish: MIL-A-8625F Type III, Class 2 Hard Anodized
- Recoil Rating: Butt-plate rated up to .50 BMG
- Country of Origin: Made in USA
What’s Included
- Magpul PRS Gen3 Precision Stock (Black)
- Cant/height-adjustable rubber butt-pad (installed)
- Rotation-limiting QD sling swivel cups
- Reversible 1.25-inch aluminum sling loop
Frequently Asked Questions
Does the PRS Gen3 come with a buffer tube?
No, the buffer tube, castle nut, and end plate are not included with the PRS Gen3. It's built to mount on a rifle-length receiver extension without an A2 spacer, and it'll also fit many mil-spec carbine and A5-length tubes. If you're building from scratch, plan on picking up a receiver extension separately.
Will the Magpul PRS Gen3 fit both AR-15 and AR-10 rifles?
Yes, the PRS Gen3 is designed to work on both AR-15/M16 and AR-10/SR-25 (DPMS pattern) platforms. Since it mounts to the receiver extension rather than the receiver itself, the same stock crosses over between the two. Just make sure your buffer tube diameter and length match up for the cleanest fit.
Can you adjust the PRS Gen3 without tools?
You can. Both length of pull and cheek piece height adjust using machined aluminum knobs with positive locking click detents, so no Allen wrenches or tools are needed. That makes it easy to dial in your fit on the fly and lock it back down so it holds through recoil.
Does the PRS Gen3 have mounting points for a monopod or sling?
It does. The stock includes rotation-limiting QD sling swivel cups plus a reversible 1.25-inch aluminum sling loop. There are also M-LOK slots on the underside for adding a rear monopod, an extra QD socket, or a section of Picatinny rail.




Reviews
There are no reviews yet.