Description
The Ruger 10/22 is one of the most-loved rimfires out there, but that skinny factory stock leaves a lot on the table. The Magpul Hunter X-22 fixes that. It's a drop-in replacement built from reinforced polymer that gives your plinker or field gun the kind of fit and control you'd expect from a serious precision rifle. Add or remove the included half-inch spacers to dial length of pull anywhere from 12.5 to 14.5 inches, and swap in optional cheek risers to get your eye lined up behind glass. That vertical 60-degree grip angle is a genuine game changer once you shoulder it.
What Sets the Hunter X-22 Apart
The headline feature is the reversible barrel tray. One side is cut for a factory pencil-profile barrel, and when you flip it over it opens up for heavy bull barrels up to 0.920 inches in diameter (12.5 inch minimum length). That means whether you're running a bone-stock 10/22 or a fully built target gun, this stock has you covered. It works with all factory magazine capacities too, so nothing about your existing setup has to change. It's also compatible with the Thompson/Center T/CR22 if that's what you're running.
Built to Get Slung, Mounted, and Carried
Magpul didn't skimp on the mounting options. The forend carries M-LOK slots so you can bolt on a bipod adapter, light, or hand stop right where you want it. Out back you get push-button QD swivel compatibility plus left and right 1.25 inch Footman's loops, giving you plenty of ways to run a sling however you like to carry. The non-slip rubber butt pad keeps things planted on your shoulder, and at around 2.45 pounds the whole thing stays reasonable in weight.
Installation is about as painless as it gets. Pull your barreled action, set it in the tray, and torque it back down. Folks consistently mention how straightforward the swap is and how much better the gun handles afterward, especially with a bigger optic on top. Made in the USA, it's the kind of upgrade that makes an already great rifle feel like it was built just for you.
Key Specifications
- Manufacturer: Magpul Industries
- Manufacturer Part Number: MAG548-FDE
- UPC: 840815101192
- Color: Flat Dark Earth
- Fits: Ruger 10/22 (.22 LR pattern), Thompson/Center T/CR22
- Material: Reinforced polymer
- Length of Pull: 12.5 in. to 14.5 in. (via 0.5 in. spacers)
- Comb Adjustment: Optional 0.25 in., 0.50 in., 0.75 in. cheek risers
- Grip Angle: 60 degrees from bore axis
- Barrel Compatibility: Factory pencil profile and bull barrels up to 0.920 in. (12.5 in. min. length)
- Accessory Mounting: M-LOK slots on forend
- Sling Mounting: Push-button QD sockets, 1.25 in. Footman's loops (left and right)
- Butt Pad: Non-slip rubber, 1.5 x 5.0 in.
- Weight: 2.45 lbs (with two spacers installed)
- Max Forend Width: 1.9 in.
- Country of Origin: Made in USA
What’s Included
- Magpul Hunter X-22 stock (Flat Dark Earth)
- Reversible barrel tray
- Length-of-pull spacers (0.5 in.)
Frequently Asked Questions
Will the Hunter X-22 fit my bull barrel 10/22?
Yes. The reversible barrel tray flips to accommodate heavy bull barrels up to 0.920 inches in diameter with a 12.5 inch minimum length. Flip it the other way and it fits the standard factory pencil-profile barrel instead. That makes it a solid choice whether you're running a stock rifle or a built target gun.
Do I need a gunsmith to install the Hunter X-22 stock?
No gunsmithing needed. This is a true drop-in stock, so you just remove your barreled action from the old stock, set it into the Hunter X-22, and torque it down. Most folks have the swap done at the kitchen table in a few minutes with basic tools.
Does this stock come with the cheek risers for comb height?
The stock ships with the length-of-pull spacers already, but the taller cheek risers (available in 0.25, 0.50, and 0.75 inch heights) are sold separately. If you're running a larger scope and need to raise your cheek weld for a proper eye line, plan on grabbing a riser to go with it.
Can I mount a bipod or sling on the Hunter X-22?
Absolutely. The forend has M-LOK slots for a bipod adapter, light, or other accessories. For slings, you get push-button QD sockets in the rear plus 1.25 inch Footman's loops on both sides, so you've got plenty of carry options.







Reviews
There are no reviews yet.